[c-nsp] PPPoE Session Limit?

[Graham Wooden]

I set the session limit to 800, arbitrarily  high to see if it would help.
Below is the output - looks ok?

#show idb

Maximum number of Software IDBs 800.  In use 23.

                       HWIDBs     SWIDBs
Active                     10         16
Inactive                    2          7
Total IDBs                 12         23
Size each (bytes)        4616       1328
Total bytes             55392      30544

HWIDB#1   FastEthernet0/0 (HW IFINDEX(10001), HW SB CDP(6), MAC ADDR(2),
Ether(1))
HWIDB#2   ATM1/0 (HW IFINDEX(10001), MAC ADDR(2), HW ATM(4), ATM DSX1(3))
HWIDB#3   ATM1/1 (HW IFINDEX(10001), MAC ADDR(2), HW ATM(4), ATM DSX1(3))
HWIDB#4   ATM1/2 (HW IFINDEX(10001), MAC ADDR(2), HW ATM(4), ATM DSX1(3))
HWIDB#5   ATM1/3 (HW IFINDEX(10001), MAC ADDR(2), HW ATM(4), ATM DSX1(3))
HWIDB#6   Virtual-Access1 (Serial(5), HW Vaccess(7))
HWIDB#7   Virtual-Access2 (Serial(5), HW Vaccess(7))
HWIDB#8   Virtual-Template10 (HW IFINDEX(10001), Serial(5))
HWIDB#9   Loopback1 (HW IFINDEX(10001))
HWIDB#10  Vif1 (HW IFINDEX(10001))
SWIDB#1   FastEthernet0/0 (SW CDP(5), NetBIOS(3), KEEPALIVE(1))
SWIDB#2   ATM1/0 (SRB(7), SW FIB PENDING EVENT(10002), NetBIOS(3), SW ATM
SUB(2), KEEPALIVE(1))
SWIDB#3   ATM1/1 (SRB(7), NetBIOS(3), SW ATM SUB(2), KEEPALIVE(1))
SWIDB#4   ATM1/1.3 (NetBIOS(3), SRB(7), SW ATM SUB(2))
SWIDB#5   ATM1/2 (SRB(7), NetBIOS(3), SW ATM SUB(2), KEEPALIVE(1))
SWIDB#6   ATM1/3 (SRB(7), NetBIOS(3), SW ATM SUB(2), KEEPALIVE(1))
SWIDB#7   Virtual-Access1 (SW Vaccess(6), NetBIOS(3), SW FIB PENDING
EVENT(10002), KEEPALIVE(1))
SWIDB#8   Virtual-Access2 (SW Vaccess(6), NetBIOS(3), KEEPALIVE(1))
SWIDB#9   Virtual-Access2.1 (VPDN SW SB(8), SW Vaccess(6))
SWIDB#10  Virtual-Access2.2 (VPDN SW SB(8), SW Vaccess(6))
SWIDB#11  Virtual-Access2.3 (VPDN SW SB(8), SW Vaccess(6))
SWIDB#12  Virtual-Access2.4 (VPDN SW SB(8), SW Vaccess(6))
SWIDB#13  Virtual-Access2.5 (VPDN SW SB(8), SW Vaccess(6))
SWIDB#14  Virtual-Template10 (NetBIOS(3), SW FIB PENDING EVENT(10002), SW
Vtemplate(4), KEEPALIVE(1))
SWIDB#15  Loopback1 (NetBIOS(3), KEEPALIVE(1))
SWIDB#16  Vif1 (NetBIOS(3), KEEPALIVE(1))




On 4/10/06 11:54 AM, "Kristofer Sigurdsson" <kristosig at gmail.com> wrote:

> Hi,
> 
>> What are the number of usable VC's for the ATM interface and the IDB limit
>> for the 2620?  If it where a C2620 limit, would a 3640 running the same ATM
>> card resolve this?
> 
> Don't know the limit for 2620, but a "show idb" should tell you.  The
> IDB limit on the 3640 is around 300, if I recall correctly, so,
> maybe...
> 
> -Kristo
> 
>