[c-nsp] PPPoE Session Limit?

[Eugene Vedistchev]

When I met this problem year ago it stuck on vtemplate debug with 
something like "Can't clone more...."

Eugene

--- Original Message ---

>Holy cats - thanks Eugene and Joe.  That was it!
>
>So, what's the relations between having the address on the loopback and the
>'5' limit?
>
>
>
>On 4/10/06 12:46 PM, "Eugene Vedistchev" <scaner at global-one.by> wrote:
>
>  
>
>>Been there, seen that.
>>Had same problem with 4+ l2tp tunnels.
>> Try moving ip address from Virtual-Template10 to Loopback with /32 mask
>>Use ip unnumbered Loopback on Virtual-Template
>>
>>
>>HTH, Eugene
>>
>>--- Original Message ---
>>
>>    
>>
>>>Here is the config - I took out some of the irrelevant stuff, but enough to
>>>get a bug picture.
>>>
>>>
>>>service timestamps debug datetime msec
>>>service timestamps log datetime msec
>>>service password-encryption
>>>!
>>>aaa new-model
>>>!
>>>!
>>>aaa authentication login radius local
>>>aaa authentication login local local
>>>aaa authentication ppp default local
>>>aaa authorization network default local
>>>aaa accounting network default start-stop group radius
>>>aaa session-id common
>>>ip subnet-zero
>>>ip cef
>>>!
>>>!
>>>virtual-profile virtual-template 10
>>>vpdn enable
>>>vpdn session-limit 800
>>>!         
>>>vpdn-group bas01
>>>accept-dialin
>>> protocol any
>>> virtual-template 10
>>>session-limit 800
>>>terminate-from hostname atlngacs70w
>>>local name BBG-Gateway
>>>lcp renegotiation on-mismatch
>>>l2tp tunnel password 7 xxxxxxxxxxxxxxxxx
>>>l2tp tunnel timeout no-session never
>>>!
>>>username user1 at domain.local privilege 0 password 7 xxxxxxxxxxxxxxxxx
>>>username user2 at domain.local privilege 0 password 7 xxxxxxxxxxxxxxxxx
>>>username user3 at domain.local privilege 0 password 7 xxxxxxxxxxxxxxxxx
>>>username user4 at domain.local privilege 0 password 7 xxxxxxxxxxxxxxxxx
>>>username user5 at domain.local privilege 0 password 7 xxxxxxxxxxxxxxxxx
>>>username user6 at domain.local privilege 0 password 7 xxxxxxxxxxxxxxxxx
>>>username user7 at domain.local privilege 0 password 7 xxxxxxxxxxxxxxxxx
>>>!
>>>interface Loopback1
>>>no ip address
>>>!
>>>interface Vif1
>>>no ip address
>>>!
>>>interface FastEthernet0/0
>>>ip address xx.xxx.xxx.xx 255.255.255.224
>>>duplex auto
>>>speed 100
>>>!
>>>interface ATM1/0
>>>no ip address
>>>no ip route-cache cef
>>>no ip route-cache
>>>shutdown
>>>no atm ilmi-keepalive
>>>no scrambling-payload
>>>!
>>>interface ATM1/1
>>>no ip address
>>>no ip route-cache cef
>>>no ip route-cache
>>>no atm ilmi-keepalive
>>>scrambling-payload
>>>arp snap
>>>arp timeout 0
>>>!
>>>interface ATM1/1.3 point-to-point
>>>description Bellsouth BBG Connection
>>>mtu 9180
>>>ip address 10.x.x.x 255.255.255.252
>>>no ip route-cache
>>>no ip mroute-cache
>>>pvc 1/37 
>>> encapsulation aal5snap
>>>!
>>>!
>>>interface ATM1/2
>>>no ip address
>>>shutdown
>>>no atm ilmi-keepalive
>>>no scrambling-payload
>>>!
>>>interface ATM1/3
>>>no ip address
>>>no ip route-cache cef
>>>no ip route-cache
>>>no ip mroute-cache
>>>shutdown
>>>no atm ilmi-keepalive
>>>no scrambling-payload
>>>!
>>>interface Virtual-Template10
>>>description Bellsouth BBG Connection
>>>mtu 9180
>>>ip address xx.xxx.xxx.193 255.255.255.192
>>>ip access-group 105 out
>>>ip mroute-cache
>>>peer default ip address pool ppp
>>>keepalive 200
>>>ppp authentication chap pap
>>>ppp ipcp dns xx.xxx.xxx.xxx
>>>ppp ipcp mask 255.255.255.192
>>>!
>>>router ospf xxx
>>>log-adjacency-changes
>>>redistribute static subnets
>>>network xx.xxx.xxx.xx  0.0.0.63 area 0
>>>!
>>>ip local pool ppp xx.xxx.xxx.200 xx.xxx.xxx.253
>>>no ip http server
>>>ip classless
>>>!
>>>
>>>
>>>
>>>On 4/10/06 12:12 PM, "Joe Maimon" <jmaimon at ttec.com> wrote:
>>>
>>> 
>>>
>>>      
>>>
>>>>Graham Wooden wrote:
>>>>
>>>>   
>>>>
>>>>        
>>>>
>>>>>Hi all,
>>>>>
>>>>>     
>>>>>
>>>>>get in. Or if someone drops off, a user that couldn't get in, will now.
>>>>>
>>>>>     
>>>>>
>>>>>          
>>>>>
>>>>It authenticates but doesnt get any IP assigned to it. Can you post your
>>>>config? Can you check if your IP pool is full?
>>>>
>>>>
>>>>   
>>>>
>>>>        
>>>>
>>>_______________________________________________
>>>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>>https://puck.nether.net/mailman/listinfo/cisco-nsp
>>>archive at http://puck.nether.net/pipermail/cisco-nsp/
>>>
>>>
>>> 
>>>
>>>      
>>>
>>_______________________________________________
>>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>https://puck.nether.net/mailman/listinfo/cisco-nsp
>>archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>>
>>    
>>
>
>
>
>
>  
>