[c-nsp] 6500 Physical Design..

[Mike Butash]

Cross connect each gige of the router to each switch, the two switches 
to each other via gige/port-channel (l3 or trunk, which ever is more 
appropriate), put /30's between them, and run igp of your choice is 
gonna be the basic here i'd say knowing nothing about your environment.  
Depends all on what you're planning on doing with the gear.  Turn up 
ospf, ldp, bgp, do some vrfs, get frisky with te tunnels... what exactly 
are you attempting to accomplish?

-mb


Mark Tohill wrote:

>Hi 
>
>Has anyone thoughts on recommended connectivity for 2 x 6509-E's with
>single Sup720's.
>
>They are to be connected to 2 x 7204VXR's/NPE-G1's with 2 free Gig
>ports.
>
>Is there a 'good' way and a 'bad' way to hook these up?
>
>Thanks
>Mark
>
>
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>  
>