[c-nsp] C7600 policy routing

Palis Michalis security at cytanet.com.cy
Mon Apr 17 01:32:19 EDT 2006


Hell all

We rae facing some problems with policy-routing using route-maps on a C7600.  I have 4 route-map statements as below

route-map lak-bs-new permit 5
 match ip address prefix-list ac117
 set ip next-hop 192.168.1.1   

route-map lak-bs-new permit 10
 match ip address prefix-list ac119
 set ip next-hop 192.168.1.2 

route-map lak-bs-new permit 15
 match ip address prefix-list ac118
 set ip next-hop 192.168.1.3 

route-map lak-bs-new permit 20
 match ip address prefix-list ac120
 set ip next-hop 192.168.1.4

access-list 117 permit ip  10.160.1.0 0.0.0.255 any
access-list 118 permit ip 10.160.64.0 0.0.63.255 any
access-list 118 permit ip 10.160.128.0 0.0.127.255 any
access-list 119 permit ip 10.161.0.0 0.0.255.255 any
access-list 119 permit ip 10.160.0.0 0.0.63.255 any

What happens is that routemaps 10,15,20 work while routmap 5 does not work.

The difference is that next hop found on route-map 192.168.1.1  is terminated on a  CEF720 48 port 10/100/1000mb Ethernet  WS-X6748-GE-TX card,  while the others are terminated on a  24  CEF720 24 port 1000mb SFP              WS-X6724-SFP    , Changing routemap numbering still routemap with next hop    terminated on the WS-X6748 doesnot work.. 

Is their any restriction on the way route-maps work on the C7600?

Your help will be appreciated




   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6748-GE-TX     SAL093274EH
  2   24  CEF720 24 port 1000mb SFP              WS-X6724-SFP       SAL09368WJR
  5    2  Supervisor Engine 720 (Active)         WS-SUP720-3BXL     SAL09370GGV


More information about the cisco-nsp mailing list