[c-nsp] IOS support for WIC-1SHDSL-V3

[Church, Chuck]

Nobody has any idea about this?  We're still waiting to hear back from
our account rep, but just wanted to make sure. 


Chuck Church
Network Engineer
CCIE #8776, MCNE, MCSE
Netco Government Services
Enterprise Network Engineering
Home Office - 864-335-9473 
Cell - 864-266-3978
cchurch at netcogov.com

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Church, Chuck
Sent: Tuesday, April 18, 2006 8:06 PM
To: nsp
Subject: [c-nsp] IOS support for WIC-1SHDSL-V3

Anyone,
 
    According to some docs I found on CCO regarding this new WIC and
2600XMs and 3745, you need 12.4.3 or above mainline.  But we got bootup
messages about this card not being supported with 12.4(3a) (sh diag
listed it as unsupported as well).  12.4(6)T seems to support it.  The
URL in question is:
http://www.cisco.com/en/US/products/hw/routers/ps274/products_data_sheet
09186a00800921f0.html 
Does anyone have a more accurate list of what supports this card?  It's
sitting in a WIC slot, as opposed to an NM-2W.  I tried the Software
Advisor tool, but it hasn't been updated to show the V2 or V3 DSL WICs.

Thanks in advance, 
 
Chuck Church
Network Engineer
CCIE #8776, MCNE, MCSE
Netco Government Services
Enterprise Network Engineering
Home Office - 864-335-9473 
Cell - 864-266-3978
cchurch at netcogov.com
 


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/