[c-nsp] Interface does not show up in running config but can be configured

[james edwards]

On 4/19/06, Kevin Graham <mahargk at gmail.com> wrote:
>
>
> That's only 254 bytes of config trimmed at 21 lines -- the pager
> throwing you off? 'sh run int fas 0/0' (or even 'term len 0') should
> atleast show this isn't the problem you think it is.
>

Cool, thanks. The "term len 0" fixed it. Looks like the term server I am
going through to get to the console was causing this issue.
Telnetting directly to the ethernet port does not have this problem.

james