[c-nsp] 2924XL gotchas?

[Adam Greene]

Thanks all for your invaluable advice. I'll make sure we use a 2924XL-EN w/
8MB RAM for this application. We won't be using extended-range VLANs, and
this will be a temporary application, so that limitation and the others
David mentioned shouldn't be a problem.

Much obliged,
Adam

----- Original Message ----- 
From: "David J. Hughes" <bambi at Hughes.com.au>
To: "Adam Greene" <maillist at webjogger.net>
Cc: <cisco-nsp at puck.nether.net>
Sent: Monday, April 24, 2006 8:16 PM
Subject: Re: [c-nsp] 2924XL gotchas?


>
> On 25/04/2006, at 3:20 AM, Adam Greene wrote:
>
> > Hi ... I'm thinking of using an old 2924XL for some basic dot1q
> > tagging. I
> > don't expect to try to push more than 5Mbps through a few ports
> > simultaneously. Any gotchas I should be aware of besides security
> > issues
> > arising from running an old unpatched IOS?
> >
>
> Things I don't like are (1) no RPVST, and (2) no err disable recovery.
> Other than that they are a pretty stable little switch.  I assume these
> aren't going into a major facility of any sort so my 2 dislikes
> shouldn't be a problem for you.
>
>
> David
> ...
>
> ---
> [This e-mail was scanned for viruses by our AntiVirus Protection System]
>
>

---
[This e-mail was scanned for viruses by our AntiVirus Protection System]