[c-nsp] Multicast Issue

[Tim Stevenson]

you should see the internal vlan id, which you can map back via sh 
vlan internal usage.

Tim

At 10:04 AM 4/27/2006, Jay Ford pronounced:
> > Also, even for the PIM problem, you could always configure the SPAN
> > dest port as a 1Q trunk & then you'd at least be able to figure out
> > which PIM packets came from the vlan you are interested in.
>
>I think the tag usage is not an option in our case because the port being
>monitored is routed (not a switchport), so there is either no tag or some
>internal tag which is not actually visible/usable.  That's as much as I
>remember; you probably know more about it.



Tim Stevenson, tstevens at cisco.com
Routing & Switching CCIE #5561
Technical Marketing Engineer, Catalyst 6500
Cisco Systems, http://www.cisco.com
IP Phone: 408-526-6759
********************************************************
The contents of this message may be *Cisco Confidential*
and are intended for the specified recipients only.