[c-nsp] Sup32 Memory upgrade

[Tim Stevenson]

It is not supported on sup2. You should be able to use all the 
entries for unicast.

Tim

At 01:03 PM 4/28/2006, Jon Lewis quipped:
>On Fri, 28 Apr 2006, Gert Doering wrote:
>
> > 256k TCAM entries, but they need to be carved up to "IPv4", "IPv6",
> > "MPLS" and "multicast routes".  Not 256k + 256k + 256k + 256k, but
> > 256k for everything in total.
> >
> > Do a "show mls cef maximum-routes" and be surprised.
>
>On a Sup2 with 12.2, I don't have that command...but the box can't even do
>MPLS or, AFAIK, IPv6...so on Sup2 how many of my 256k TCAM entries
>available for unicast routes?
>
>----------------------------------------------------------------------
>   Jon Lewis                   |  I route
>   Senior Network Engineer     |  therefore you are
>   Atlantic Net                |
>_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/



Tim Stevenson, tstevens at cisco.com
Routing & Switching CCIE #5561
Technical Marketing Engineer, Catalyst 6500
Cisco Systems, http://www.cisco.com
IP Phone: 408-526-6759
********************************************************
The contents of this message may be *Cisco Confidential*
and are intended for the specified recipients only.