[c-nsp] RJ45 SFP in a 6748 blade

[Tim Stevenson]

It is 1000BaseT only, was it a gig NIC?

Tim

At 04:06 PM 4/28/2006, George Antoniou quipped:
>Hi All,
>We recently ran into a weird situation where we wanted to run copper
>gbic on the 6748....  apparently they are not compatible?  Engine is a
>720 with a 6748 running LC gbics but it doesn't appear to have link
>after insert the copper gbic to a copper NIC (on a server).
>
>Any experiences with this?
>
>Thanks,
>George
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/



Tim Stevenson, tstevens at cisco.com
Routing & Switching CCIE #5561
Technical Marketing Engineer, Catalyst 6500
Cisco Systems, http://www.cisco.com
IP Phone: 408-526-6759
********************************************************
The contents of this message may be *Cisco Confidential*
and are intended for the specified recipients only.