[c-nsp] Strange error with a PA-CT3 4/T1 card

[Oliver Boehmer (oboehmer)]

Ted Mittelstaedt <> wrote on Wednesday, August 09, 2006 3:25 PM:

> Hi All,
> 
>   When trying to run one of these cards in a 7206 non-VXR with a
> NPE200 I get the following error:
> 
> sh controller t3
> T3 1/0 is down.
>        -----------------Warning-----------------
>        Found pre-rev3 mueslix CT3 PA in slot 1.
>        Pre-rev3 mueslix CT3 PA is not supported.
>        Replace the CT3 PA with rev3 or above.
> 
>   CT3 H/W Version: 5.0.0, CT3 ROM Version: 1.2, CT3 F/W Version: 2.8.0
>   Mx H/W version: 2, Mx ucode ver: 1.34
>   Applique type is Channelized T3

I can't seem to find a field notice or something like this, all I can
tell is that this error message has been in the code since the old 11.1
days (almost 10 yrs ago), so you must have gotten your hand on really
old hardware.
Sorry, but I can't give you more info than this without some more
serious digging/checking with folks..

	oli