[c-nsp] rate-limit with Catalyst 35XX L3 switches

[Dmitry Valdov]

Hi!


On Wed, 16 Aug 2006, Asbjorn Hojmark - Lists wrote:

>> It seems that rate-limit command is configurable on SVI but
>> does not do anything.
>
> That is correct. CAR is not supported on the switches.
>
>> If switch can't then are there any other ways to provide
>> bandwidth limiting for end user?
>
> You can do policing (3550) or shaping (3560). Se the QoS
> section in the configuration guide.

AFAIK, 3550 doesn't support vlan-based (on SVIs) QoS at all. 3560 do.

-- 
Dmitry Valdov
CCIE #15379