[c-nsp] VIP Crashes

Chris O'Hair chris_posaune at hotmail.com
Fri Aug 18 14:28:47 EDT 2006


I have a used 7505 that I am hoping to put into a staging/development 
network.  The issue I am having is that the VIP4-50 is crashing.  Any help 
would be appreciated

I put rthe outer on our LAN and set my pc and phone to use it as their gw.  
We did several ping flood and large transfers with no issues.  About 4 hours 
later, the VIP crashed.  The graphs show no more the 100k of traffic at any 
given time (5min avg).

Thanks in advance.

Chris

Aug 18 01:02:00.476: %VIP4-50 RM5271-1-MSG: slot3 PMA error register0 =
0000000002810000
Aug 18 01:02:00.484: %VIP4-50 RM5271-1-MSG: slot3     PCI Target abort error
Aug 18 01:02:00.492: %VIP4-50 RM5271-1-MSG: slot3     PCI Slave Parity error
Aug 18 01:02:00.500: %VIP4-50 RM5271-1-MSG: slot3     PCI SERR
Aug 18 01:02:00.508: %VIP4-50 RM5271-1-MSG: slot3     PCI0 master address =
00000000
Aug 18 01:02:00.516: %VIP4-50 RM5271-1-MSG: slot3     PCI0 slave address =
00002210
Aug 18 01:02:00.524: %VIP4-50 RM5271-1-MSG: slot3 PMA error register1 =
0000000000000000
Aug 18 01:02:00.532: %VIP4-50 RM5271-1-MSG: slot3     PCI1 master address =
00000000
Aug 18 01:02:00.540: %VIP4-50 RM5271-1-MSG: slot3     PCI1 slave address =
00000000
Aug 18 01:02:00.548: %VIP4-50 RM5271-1-MSG: slot3 Latched Addresses
Aug 18 01:02:00.556: %VIP4-50 RM5271-1-MSG: slot3     MPU addr exception/WPE
address = 00000000
Aug 18 01:02:00.564: %VIP4-50 RM5271-1-MSG: slot3     MPU addr exception/WPE
data = 00000000
Aug 18 01:02:00.572: %VIP4-50 RM5271-1-MSG: slot3     ProcMem addr exception 
=
00000000
Aug 18 01:02:00.580: %VIP4-50 RM5271-1-MSG: slot3     Pakmem addr exception 
=
00000000
Aug 18 01:02:11.588: %VIP4-50 RM5271-3-MSG: slot3 VIP-3-SVIP_RELOAD: SVIP
Reload is called.
Aug 18 01:02:11.604: %VIP4-50 RM5271-3-MSG: slot3 VIP-3-SYSTEM_EXCEPTION: 
VIP
System Exception occurred sig=22, code=0x0, context=0x60EF8A08

Aug 18 01:02:11.612: %DBUS-3-DBUSINTERRSWSET: Slot 3, Internal Error due to
VIP crash
Aug 18 01:02:16.144: %RSP-3-RESTART: cbus complex

#sh ver
Cisco Internetwork Operating System Software
IOS (tm) RSP Software (RSP-JSV-M), Version 12.3(19), RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Thu 11-May-06 21:13 by evmiller
Image text-base: 0x40010AFC, data-base: 0x4223C000

ROM: System Bootstrap, Version 12.0(10r)S1, RELEASE SOFTWARE (fc1)
BOOTLDR: RSP Software (RSP-JSV-M), Version 12.3(19), RELEASE SOFTWARE (fc2)

HQVA_7505 uptime is 39 minutes
System returned to ROM by reload at 22:14:33 UTC Tue Aug 8 2006
System restarted at 13:31:50 EDT Fri Aug 18 2006
System image file is "disk0:rsp-jsv-mz.123-19.bin"
Last reload reason: Unknown reason


cisco RSP4+ (R5000) processor with 262144K/2072K bytes of memory.
R5000 CPU at 200MHz, Implementation 35, Rev 2.1, 512KB L2 Cache
Last reset from power-on
G.703/E1 software, Version 1.0.
G.703/JT2 software, Version 1.0.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
Bridging software.
TN3270 Emulation software.
Chassis Interface.
1 VIP4-50 RM5271 controller (4 FastEthernet).
4 FastEthernet/IEEE 802.3 interface(s)
123K bytes of non-volatile configuration memory.

46976K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).
24576K bytes of Flash PCMCIA card at slot 1 (Sector size 128K).
8192K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102


#sh inventory
NAME: "7505 chassis, ID:50022032", DESCR: "7505 chassis"
PID: 1                 , VID: Hardware Version : 1.00, Board Revision : B0, 
SN: 50022032

NAME: "Line Card 3", DESCR: "Versatile Interface Processor (VIP4-50)"
PID: VIP4-50           , VID: Hardware Version : 2.02, Board Revision : A0, 
SN: 18618154

NAME: "Card Slot 3, Bay 0", DESCR: "Dual Port FastEthernet (RJ45)"
PID: PA-2FE-TX         , VID: Hardware Version : 1.0, Board Revision : B0, 
SN: JAE064006TB

NAME: "Card Slot 3, Bay 1", DESCR: "Dual Port FastEthernet (RJ45)"
PID: PA-2FE-TX         , VID: Hardware Version : 1.0, Board Revision : B0, 
SN: JAE064006X5

NAME: "RSP at Slot 4", DESCR: "R5000"
PID: RSP4+             , VID: Hardware Version : 1.5, Board Revision : A0, 
SN: 21830447


#sh diagbus 3
Slot 3:
        Physical slot 3, ~physical slot 0xC, logical slot 3, CBus 0
        Microcode Status 0x4
        Master Enable, LED, WCS Loaded
        Board is analyzed
        Pending I/O Status: None
        EEPROM format version 1
        VIP4-50 RM5271 controller, FRU: VIP4-50=, HW rev 2.02, board 
revision A0
        Serial number: 18618154  Part number: 73-4708-01
        Test history: 0x00        RMA number: 00-00-00
        Flags: cisco 7000 board; 7500 compatible

        EEPROM contents (hex):
          0x20: 01 31 02 02 01 1C 17 2A 49 12 64 01 00 00 00 00
          0x30: 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

        Slot database information:
        Flags: 0x4      Insertion time: 0x2A58 (00:36:25 ago)

        Controller Memory Size: 128 MBytes CPU SDRAM, 64 MBytes Packet SDRAM
        Startup time: 9012 msec

        PA Bay 0 Information:
                Dual Port Fast Ethernet (RJ45), 2 ports, FRU: PA-2FE-TX=
                EEPROM format version 4
                HW rev 1.00, Board revision B0
                Serial number: JAE064006TB  Part number: 73-5419-06

        PA Bay 1 Information:
                Dual Port Fast Ethernet (RJ45), 2 ports, FRU: PA-2FE-TX=
                EEPROM format version 4
                HW rev 1.00, Board revision B0
                Serial number: JAE064006X5  Part number: 73-5419-06

        --Boot log begin--

Cisco Internetwork Operating System Software
IOS (tm) VIP Software (SVIP-DW-M), Version 12.3(19), RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Thu 11-May-06 22:15 by evmiller
Image text-base: 0x60010AE4, data-base: 0x60560000


        --Boot log end--

#sh diagbus 4
Slot 4:
        EEPROM format version 1
        Route/Switch Processor 4, FRU: RSP4+= , HW rev 1.05, board revision 
A0
        Serial number: 21830447  Part number: 73-5512-01
        Test history: 0x00        RMA number: 00-00-00
        Flags: cisco 7000 board; 7500 compatible

        EEPROM contents (hex):
          0x20: 01 1A 01 05 01 4D 1B 2F 49 15 88 01 00 00 00 00
          0x30: 50 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00

#sh run
Current configuration : 2134 bytes
!
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
no service single-slot-reload-enable
!
hostname 7505
!
boot-start-marker
boot system flash disk0:rsp-jsv-mz.123-19.bin
boot-end-marker
!
clock timezone EST -5
clock summer-time EDT recurring
aaa new-model
!
!
aaa authentication login default local
aaa session-id common
ip subnet-zero
!
!
ip domain name x.net
ip name-server x.x.x.x
!
ip cef
!
interface FastEthernet3/0/0
ip address <public addr>
ip nat outside
speed 100
full-duplex
!
interface FastEthernet3/0/1
ip address <internal voice>
ip nat inside
duplex auto
speed auto
!
interface FastEthernet3/1/0
ip address <internal data>
ip nat inside
duplex auto
speed auto
!
interface FastEthernet3/1/1
no ip address
shutdown
duplex auto
speed auto
!
ip nat inside source list 10 interface FastEthernet3/0/0 overload
ip classless
ip route 0.0.0.0 0.0.0.0 <gw>
no ip http server
!
logging x.x.x.x
access-list 10 permit x.x.x.x
access-list 23 permit x.x.x.x
no cdp run
!
snmp-server view B mib-2 included
snmp-server view B cisco included
snmp-server community A view B RO
!
line con 0
line aux 0
line vty 0 4
access-class 23 in
exec-timeout 0 0
password
!
ntp clock-period 17180016
ntp server 192.43.244.18
ntp server 70.85.188.218
!
end

_________________________________________________________________
FREE pop-up blocking with the new MSN Toolbar – get it now! 
http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/



More information about the cisco-nsp mailing list