[c-nsp] Setup the image file

[Thomas Renzy]

Everton,

Try disk0: . See below.

gw1#sh slot0:
Open device slot0 failed (Device not ready)
gw1#sh disk0:
-#- --length-- ---------date/time--------- path
1     12768800 Jul 18 2003 15:20:30 +00:00 c7200-ik9s-mz.122-17a.bin
2     14746636 Apr 16 2004 15:34:16 +00:00 c7200-jk9s-mz.122-23a.bin
3        11014 Aug 25 2005 13:02:24 +00:00 running-config

20316160 bytes available (27525120 bytes used)

gw1# 

Thomas


Thomas Renzy 
IT Network Engineering
Symantec Corporation
Office: +650-527-4734
Mobile: +650-248-1099
Fax: +650-527-2034

"Only two things are infinite, the universe and human stupidity, and I'm
not sure about the former." - Albert Einstein

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Everton Diniz
Sent: Monday, August 21, 2006 4:49 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Setup the image file

Again Guys,

im trying to upgrade the IOS into 7206, but im not get to do this.

i already copy the image to the disk, but when i do command to see the
files, i have this output.

sh slot0:
Open device slot0 failed (Device not ready)

Or, how can i setup the image file to be the other file that i put into
the router??

Tks guys,

Everton
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/