[c-nsp] Setup the image file

[Everton Diniz]

Ok Guys,

But so why when i do a sh disk0: show me this


sh disk0:
******** ATA Flash Card Geometry/Format Info ********

ATA CARD GEOMETRY
   Number of Heads:       4
   Number of Cylinders    734
   Sectors per Cylinder   32
   Sector Size            512
   Total Sectors          93952

ATA CARD FORMAT
   Number of FAT Sectors  46
   Sectors Per Cluster    8
   Number of Clusters     11692
   Number of Data Sectors 93792
   Base Root Sector       220
   Base FAT Sector        128
   Base Data Sector       252


And not the files ..

Tks



On 8/22/06, Brandon Bennett <bennetb at gmail.com> wrote:
>
> See this link about the different filesystems found on Cisco routers.
>
> http://www.cisco.com/warp/public/63/pcmciamatrix.html
>
> It will explain disk0: vs slot0 on the 7200 platform
>
> ~brandon
>
> On 8/21/06, Everton Diniz <notrevebr at gmail.com> wrote:
> > Again Guys,
> >
> > im trying to upgrade the IOS into 7206, but im not get to do this.
> >
> > i already copy the image to the disk, but when i do command to see the
> > files, i have this output.
> >
> > sh slot0:
> > Open device slot0 failed (Device not ready)
> >
> > Or, how can i setup the image file to be the other file that i put into
> the
> > router??
> >
> > Tks guys,
> >
> > Everton
>