[c-nsp] 6500 crash

[Michail Litvak]

Hi All,

cat6500 with sup720BXL3 with OSM12 module (2xSTM4 + 4 Gbic ether)

What is TestSPRPInbandPing  ?

>From switch-sp sh stacks:

%CONST_DIAG-SP-3-HM_TEST_FAIL: Module 6 TestSPRPInbandPing consecutive
failure count:5
%CONST_DIAG-SP-6-HM_TEST_INFO: CPU util(5sec): SP=12% RP=0% Traffic=0%
netint_thr_active[0], Tx_Rate[14666], Rx_Rate[3962], dev=1[IPv4,
fail=5], 2[IPv4, fail=5], 3[IPv6, fail=5], 4[IPv6, fail=5]
%CONST_DIAG-SP-3-HM_TEST_FAIL: Module 6 TestSPRPInbandPing consecutive
failure count:10
%CONST_DIAG-SP-6-HM_TEST_INFO: CPU util(5sec): SP=25% RP=3% Traffic=0%
netint_thr_active[0], Tx_Rate[22550], Rx_Rate[3641], dev=1[IPv4,
fail=10], 2[IPv4, fail=10], 3[IPv6, fail=10], 4[IPv6, fail=10]
Aug 22 19:37:37.436: SP: ELAM CAPTURE FOR FIB DEV 1:
Aug 22 19:37:37.436: SP: ---------------------------

Aug 22 19:37:37.436: SP: Elam trigger: src_index=0x380 vlan=1009

Aug 22 19:37:37.436: SP:  get item
Aug 22 19:37:37.436: SP:  get la_active
Aug 22 19:37:37.476: SP:  elam started!
Aug 22 19:37:48.360: SP: capture is still in progress
Aug 22 19:37:48.372: SP: capture is still in progress
Aug 22 19:37:48.384: SP: capture is still in progress

[skipped]

-- %CONST_DIAG-SP-2-HM_SUP_CRSH: Supervisor crashed due to
unrecoverable errors, Reason: Failed TestSPRPInbandPing

%Software-forced reload

-- 
MYL2-RIPE