[c-nsp] IMA Interface/PVC flapping issue

[Michael Nicks]

2651 doesn't support that command:

#network-clock-participate aim 0
                                                    ^
% Invalid input detected at '^' marker.

2821s do though.
-- 
Michael Nicks
Network Engineer
KanREN
e: mtnicks at kanren.net
o: +1-785-856-9800 x221
m: +1-913-378-6516



Mark Rogaski wrote:
> An entity claiming to be Thomas Renzy (trenzy at symantec.com) wrote:
> : Hello Michael,
> : 
> : Have you turned on network-clock-participate and network-clock-select
> : for your WIC's and T1's?
> : 
> : Here is a sample from my router that includes these commands for ATM IMA
> : (4xT1 IMA)
> : 
> : network-clock-participate wic 0 
> : network-clock-participate wic 1  
> : network-clock-select 1 T1 0/0
> : network-clock-select 2 T1 0/1
> : network-clock-select 3 T1 0/2
> : network-clock-select 4 T1 0/3   
> : 
> 
> You'll also need to add the following line:
> 
>  network-clock-participate aim 0
> 
> You can check the timing reference with "sh network-clock", it should show
> one of the T1's as the current reference instead of the default "Backplane
> PLL".  
> 
> Mark
> 
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/