[c-nsp] 6500 stuck in boot cycle

[Sean Mathias]

Yeah, looks like it can't load the image...

Break in to ROMMON mode and load a new image, or use another PCMCIA card
with a good image.


http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note
09186a00800949c3.shtml 

Sean

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Chris Baird
Sent: Friday, December 01, 2006 1:11 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] 6500 stuck in boot cycle

This is a 6509 with a Sup2 running 12.1(27b) in native mode.  The output
below continually cycles.I need to get this thing up.  Any ideas? 

 

System Bootstrap, Version 7.1(1)

Copyright (c) 1994-2001 by cisco Systems, Inc.

c6k_sup2 processor with 262144 Kbytes of main memory

 

Autoboot executing command: "boot
bootflash:c6sup22-jk2s-mz.121-27b.E1.bin"

open(): Open Error = -9

loadprog: error - on file open

boot: cannot load "bootflash:c6sup22-jk2s-mz.121-27b.E1.bin"

 

 

thanks,

Chris



________________________________________________________________________
___

All outbound Email is scanned by Nexa Technologies Email Security
Systems.
________________________________________________________________________
___
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/