[c-nsp] 6500 stuck in boot cycle

[Sukumar Subburayan]

When you get the System BootStrap, Version 7.1(1) banner, from the 
console, can you press the Break-key or whatever is the break key sequence 
for your console terminal program, which will drop you to rommon prompt.

Then try manually booting the image via 'boot ...' command

sukumar




On Fri, 1 Dec 2006, Chris Baird wrote:

> This is a 6509 with a Sup2 running 12.1(27b) in native mode.  The output
> below continually cycles.I need to get this thing up.  Any ideas?
>
>
>
> System Bootstrap, Version 7.1(1)
>
> Copyright (c) 1994-2001 by cisco Systems, Inc.
>
> c6k_sup2 processor with 262144 Kbytes of main memory
>
>
>
> Autoboot executing command: "boot bootflash:c6sup22-jk2s-mz.121-27b.E1.bin"
>
> open(): Open Error = -9
>
> loadprog: error - on file open
>
> boot: cannot load "bootflash:c6sup22-jk2s-mz.121-27b.E1.bin"
>
>
>
>
>
> thanks,
>
> Chris
>
>
>
> ___________________________________________________________________________
>
> All outbound Email is scanned by Nexa Technologies Email Security Systems.
> ___________________________________________________________________________
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>