[c-nsp] Per user based QoS with AAA on 6509

[Tassos Chatzithomaoglou]

That's used for user PPP termination i guess, something that's not supported in 6500/7600 (except MWAN maybe?).
Although Cisco announced a BRAS functionality in 7600 very soon ;)

Have a look here for an alternative:
http://www.cisco.com/en/US/products/hw/switches/ps708/products_white_paper0900aecd803e5017.shtml

--
Tassos

Cisco Boy wrote on 3/12/2006 11:42 μμ:
> Hi Group,
> Just wondering if anybody can confirm the feature called "Per user baed 
> QoS" is supported in Sup720?
> 
> It is supported in 7300 series routers, see below:
> 
> 
> Monitoring and Maintaining Per-User QoS via AAA Policy Name
> 
> To monitor and maintain per-user QoS using the AAA policy name, use the 
> following debug commands:
> SUMMARY STEPS
> 
> 1. enable
> 
> 2. debug aaa authorization
> 
> 3. debug aaa per-user
> DETAILED STEPS
> 
> 
> Command or Action
> 
> Purpose
> 
> Step 1
> 
> 
> enable
> Example:
> 
> Router> enable
> 
> 
> Enables privileged EXEC mode.
> 
> .Enter your password if prompted.
> 
> Step 2
> 
> 
> debug aaa authorization
> Example:
> 
> Router# debug aaa authorization
> 
> 
> Displays information about AAA/TACACS+ authorization.
> 
> Step 3
> 
> 
> debug aaa per-user
> Example:
> 
> Router# debug aaa per-user
> 
> 
> Displays information about per-user QoS parameters.
> 
> Configuration Examples for Per-User QoS
> via AAA Policy Name
> 
> This section provides the following configuration example:
> 
> . Per-User QoS Using the AAA Policy Name
> Per-User QoS Using the AAA Policy Name
> 
> The following example shows that per-user QoS is being configured using 
> the AAA policy name "policy_class_1_2":
> 
> class-map match-all class1
> 
> match access-group 101
> 
> class-map match-all class2
> 
> match qos-group 4
> 
> match access-group 101
> 
> 
> policy-map policy_class_1_2
> 
> class class1
> 
> bandwidth 3000
> 
> queue-limit 30
> 
> class class2
> 
> bandwidth 2000
> 
> class class-default
> 
> bandwidth 500
> 
> 
> peruser_qos_1 Password = "lab"
> 
> Service-Type = Framed,
> 
> Framed-Protocol = PPP,
> 
> Cisco:Cisco-avpair = "ip:sub-policy-In=ssspolicy"
> 
> !ssspolicy in the above line is the name of the policy.
> 
> 
> peruser_qos_2 Password = "lab"
> 
> Service-Type = Framed,
> 
> Framed-Protocol = PPP,
> 
> Cisco:Cisco-avpair = "ip:sub-policy-Out=ssspolicy"
> 
> CiscoBoy
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>