[c-nsp] ME6524 port-channel load-balancing

[Sukumar Subburayan]

I think this is a doc bug. We will get this fixed.

6524#show ver
Cisco Internetwork Operating System Software
IOS (tm) s6523_rp Software (s6523_rp-IPSERVICES-M), Version 12.2(18)ZU, 
RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by cisco Systems, Inc.


6524(config)#port-channel load-balance mpls ?
   label     Use MPLS label only
   label-ip  Use MPLS label or IP

6524(config)#port-channel load-balance mpls label
6524(config)#
6524#show etherchannel load-balance
EtherChannel Load-Balancing Configuration:
         src-dst-port
         mpls label

EtherChannel Load-Balancing Addresses Used Per-Protocol:
Non-IP: Source XOR Destination MAC address
   IPv4: Source XOR Destination TCP/UDP (layer-4) port number
   IPv6: Source XOR Destination IP address
   MPLS: Label only
6524#

sukumar




On Wed, 6 Dec 2006, Rubens Kuhl Jr. wrote:

> Hi.
>
> Can someone with access to a ME 6524 confirm a curios thing ?
>
> 6500/7600 supports "port-channel load-balance mpls", in order to more
> evenly balance a port-channel carrying MPLS traffic.
>
> 12.2ZU (ME6254 IOS version) docs state no such option:
> http://www.cisco.com/univercd/cc/td/doc/product/metro/me6500/122zu/cr/p1.htm#wp1021955
>
> But since ME6524 is based on PFC3C, it's curious that it doesn't
> support something 6500 does. It may be a doc bug... or not.
>
>
> Thanks,
> Rubens
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>