[c-nsp] PA-GE not recognized by 7206VXR

[odauby]

> odauby wrote:
> >Same message with the card inserted before power-up ... Sounds bad...
> >
> >
> Indeed... Just to be sure, can you please post the output of "sh diag 3"
> and "sh pci bridge 3" ?
> 

sh diag shows a Gigabit PA, sh pci bridge makes the router crash...

O.


7206VXR-lab#sh diag 3
Slot 3:
        Gigabit Ethernet Port adapter, 1 port
        Port adapter is disabled deactivated powered off
        Port adapter insertion time unknown
        EEPROM contents at hardware discovery:

7206VXR-lab#sh pci bridge 3


Data Bus Error exception, CPU signal 10, PC = 0x608AE504


-Traceback= 608AE504 608A4D58 608DEB1C 608E0190 608E038C 6071A510 60732FF0
60818FEC 60818FD8
$0 : 00000000, AT : 627F0000, v0 : FFFFFFFF, v1 : 00000000
a0 : FE041000, a1 : 00000004, a2 : 634A9A92, a3 : 634A9A90
t0 : 3400C101, t1 : 3400C180, t2 : 00000080, t3 : FE000000
t4 : 60835A70, t5 : 00000000, t6 : 0000E2D3, t7 : 634A9A88
s0 : 00000000, s1 : 00041000, s2 : 62B4B6D0, s3 : 62672564
s4 : 00000000, s5 : 62A90000, s6 : 62660000, s7 : 62A60000
t8 : 62B55404, t9 : 00000000, k0 : 3040D001, k1 : 00000800
gp : 627FA920, sp : 634A9A80, s8 : 00000000, ra : 608AE504
EPC  : 608AE504, ErrorEPC : 9A93EE83, SREG     : 3400C103
MDLO : 00000000, MDHI     : 00000003, BadVaddr : 697A0AC0
Cause 0000401C (Code 0x7): Data Bus Error exception

Writing crashinfo to bootflash:crashinfo_20010702-160747

=== Flushing messages (16:07:47 UTC Mon Jul 2 2001) ===

Buffered messages:

00:00:13: %FX1000-3-NOTFX1000: PA bay 3, device number 0: unknown device
(0xFFFFFFFF)
00:00:13: %PA-3-DEACTIVATED: port adapter in bay [3] powered off.
00:00:15: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
00:00:15: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed state to up
00:00:15: %LINK-3-UPDOWN: Interface GigabitEthernet0/3, changed state to up
00:00:15: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up
00:00:15: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
00:00:15: %LINK-3-UPDOWN: Interface FastEthernet1/0, changed state to up
00:00:16: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1,
changed state to up
00:00:16: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2,
changed state to down
00:00:16: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/3,
changed state to down
00:00:16: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1,
changed state to down
00:00:16: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0,
changed state to down
00:00:16: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0,
changed state to down
00:00:17: %SYS-5-CONFIG_I: Configured from memory by console
00:00:18: %SYS-5-RESTART: System restarted --
Cisco IOS Software, 7200 Software (C7200-P-M), Version 12.2(25)S4, RELEASE
SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Wed 13-Apr-05 02:56 by ccai
00:00:19: %LINK-5-CHANGED: Interface FastEthernet1/0, changed state to
administratively down
00:00:19: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
00:00:19: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up
00:00:19: %LINK-5-CHANGED: Interface GigabitEthernet0/3, changed state to
administratively down
00:00:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2,
changed state to up
00:00:27: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2,
changed state to down
Queued messages:
No warm reboot Storage
*** System received a Bus Error exception ***
signal= 0xa, code= 0x1c, context= 0x62a8d804
  PC = 0x608ae504, SP = 0x634a9a80, RA = 0x608ae504
  Cause Reg = 0x0000401c, Status Reg = 0x3400c103

System Bootstrap, Version 12.3(4r)T3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2004 by cisco Systems, Inc.
C7200 platform with 262144 Kbytes of main memory


Readonly ROMMON initialized

Self decompressing the image :
########################################################################### [OK]

%FX1000-3-NOTFX1000: slot[3,0] detects unknown PCI device (id=0xFFFFFFFF)
%PA-3-DEACTIVATED: port adapter in bay [3] powered off.
%SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.
---
Scarlet ONE -  Combine ADSL with unlimited fixed phone and save 400 euros
http://www.scarlet.be