[c-nsp] Dot1q trunk on 6509

[Brendan Mannella]

What error does it give you? Did you make sure you made the port a
"switchport" and not a routed port?

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Tuesday, December 12, 2006 2:27 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Dot1q trunk on 6509

I'm trying to setup a port on my 6509 on a WS-X6148-GE-TX to be a 802.1q
trunk.  But I try to add switchport trunk encap dot1q and it won't take
it.  Am I Configuring it incorrectly?

 

Ver 12.2.18sxf4

 

TIA

 

Scott

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.15.15/579 - Release Date: 12/7/2006
1:31 PM
 

-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.15.15/579 - Release Date: 12/7/2006
1:31 PM