[c-nsp] Hub-Spoke IPSEC tunnels

[Ted Mittelstaedt]

look into u-turning on pixos 7.xx

Ted
----- Original Message ----- 
From: "Mounir Mohamed" <mounir.mohamed at gmail.com>
To: "cisco-nas" <cisco-nas at puck.nether.net>; <cisco-nsp at puck.nether.net>
Sent: Monday, December 11, 2006 3:08 PM
Subject: [c-nsp] Hub-Spoke IPSEC tunnels


> Dear All,
>
> I have centeral Firewall (PIX535) in HQ peering via IPSEC tunnles with
other
> 3 branches, all branches using Cisco 1700 with IOS feature set currently
> there is IPSEC tunnel between each branch and HQ FW, i need to configure
the
> centeral FW to doing routing between all branches, so if branch x need to
> communicate with branch y it should establish it's IPSEC with HQ, then the
> HQ using the incoming traffic to initiate IPSEC tunnel with y (if idel)
then
> routed the traffic between both branches.
>
> Mainly i need to do Hub-Spoke IPSEC tunnels due to lack of hardware in the
> remote branches routers.
> Is that allowed, If yes kindly advice.
>
> -- 
> Best Reagrds,
> Mounir Mohamed
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>