[c-nsp] route-map 'continue' broken in 6500 12.2(18)SXF6?

[Collins, Richard (SNL US)]

I can confirm that on our 7613 Supervisor IOS (tm) s72033_rp Software
(s72033_rp-ADVENTERPRISEK9_WAN-M), Version 12.2(18)SXF6, RELEASE
SOFTWARE (fc1)  it does not work like what you are seeing.

This type of route-map for the BGP does work on the MWAN card in the
7613  Cisco IOS Software, MWAM Software (MWAM-G8IS-M), Experimental
Version 12.4.

I tried it on the 3550 Cisco IOS Software, C3550 Software
(C3550-IPSERVICESK9-M), Version 12.2(25)SEE2, RELEASE SOFTWARE (fc1) and
though it accepts the "continue" statement it also does not work.

Rich


>Date: Fri, 1 Dec 2006 19:37:20 -0500
>From: "James Jun" <james at towardex.com>
>Subject: [c-nsp] route-map 'continue' broken in 6500 12.2(18)SXF6?
>To: <cisco-nsp at puck.nether.net>
>Message-ID: <20061202003641.2D54B6D47C at mx01.bos.ma.towardex.com>
>Content-Type: text/plain;      charset="us-ascii"
>
>Hello,
>
>Anyone tried using 'continue' statement when building BGP route-map
policies
>on 12.2(18)SXF6 code for 6500 series?  It doesn't appear to work here,
on
>neither inbound nor outbound route-map.. route-map evaluation/search
>terminates when a match is found even when 'continue' is present.  Same
>configuration appears to work properly however on a 7200 router box
running
>advipservices/12.4(9)T1 code.
>
>Unless ofcourse, I'm doing something wrong :)
>
>Here is an outbound route-map that didn't work.  Search/evaluation
>terminates on step 'permit 2' when matched, instead of continuing
forward to
>step 5.
>
>route-map n701-1239-fenwy-out permit 1
> match ip address prefix-list pl-export-1239-fenwy-bypass
>!
>route-map n701-1239-fenwy-out permit 2
> match community n-on-net
> continue 5
>!
>route-map n701-1239-fenwy-out deny 3