[c-nsp] eBGP Multipath

[Peter Salanki]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

You assume that he is doing per-packet load-sharing, I assume that he  
wouldn't do anything that stupid :)

18 dec 2006 kl. 16.37 skrev Robert E. Seastrom:

>
> "Kevin Cook" <kcook at amnetsystems.com> writes:
>
>> Everything seems to match in terms of metrics etc, but the link above
>> says that it will not multipath via two different AS neighbors via  
>> this
>> method.
>
> You really don't want to do ebgp multipath to two different isps;
> it'll play havoc with your tcp timers and will likely cause out of
> order packet arrival.  Even two different routers at the same ISP are
> a step away from goodness (but perhaps an acceptable one).
>
>                                         ---rob
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

Sincerely

Peter Salanki
Chief Network Engineer
Bahnhof AB (AS8473)
www.bahnhof.se
Office: +46855577132
Cell: +46709174932


-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2.2 (Darwin)

iD8DBQFFhrekiQKhdiFGiogRAgWfAJ9OF3gGj6AIuOsCllkIYM1PpnTMuACfQfvI
5M7wJYOYUVnticgcKuDa3FU=
=MFJq
-----END PGP SIGNATURE-----