[c-nsp] 6500 Memory

[Robert Crowe]

remote command switch show version


 	
Robert Crowe

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Kevin Cook
Sent: Monday, December 18, 2006 10:12 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] 6500 Memory

I am wondering how do I tell how much base memory do I have versus the
MSFC2 memory.

I know of the show proc mem and show memory commands, also show version
shows memory.

 

My question is what command shows the baseboard (Supervisor 32 memory)
versus the MSFC2a memory?

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/