[c-nsp] analog to digital

[Jonathan Charles]

Well, one way or another, you are going to need ports to plug the lines into
and you are going to need DSPs, there really isn't a way around it.



Jonathan

On 12/20/06, George Sobhi <gsobhi at nileonebrokers.com> wrote:
>
> Dear Kevin,
> Sorry I mistyped my router is 1760 and if there is a way to do that
> without
> purchasing any hardware??
> Thanx and regards
> -----Original Message-----
> From: Kevin Graham [mailto:mahargk at gmail.com]
> Sent: Tuesday, December 19, 2006 6:40 PM
> To: George Sobhi
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] analog to digital
>
> On 12/19/06, George Sobhi <gsobhi at nileonebrokers.com> wrote:
> >
> > How can I figure the PSTN analog line to 2700 Cisco router?
>
> Atleast one of those numbers is wrong -- 2700 doesn't exist, perhaps
> one of 1700, 2600, 2800, 3700? Either way, what you're looking for is
> an FXO interface; with that, and the right model number the
> appropriate part should be easy to chase down on CCO.
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>