[c-nsp] 7606 power supply issue
nealr
neal at lists.rauhauser.net
Thu Dec 21 09:28:43 EST 2006
Where did you find them? There are lots and lots and lots of
counterfeits in the lower end products - can't trust a bit of WIC/VIC,
NM, etc that you might find on Ebay. It wouldn't surprise me a bit if
there were outright copies of power supplies or people relabeling
smaller output supplies to look like something else.
Edoardo Martelli wrote:
> Hello
>
> We recently bought a 7606 with two PWR-1900-AC/6 power supply units.
> They are supposed to provide 1900w at 220V, but in fact they only
> provide 1000W. We RMAed them, but still the new ones came with the same
> problem.
>
> The chassis seems to be ok, because I tried the PWR-1900-AC/6 of another
> 7606 we have, and they provide 1900W as expected.
>
> Anyone had this problem with recently bought PWR-1900-AC/6?
> Maybe there is a switch inside the PSU that has to be changed?
>
> Thank you
> Edoardo
>
>
>
> New PSUs:
>
> g513-e-rci76-2#sh power
> system power redundancy mode = combined
> system power total = 1698.90 Watts (40.45 Amps @ 42V)
> system power used = 1579.62 Watts (37.61 Amps @ 42V)
> system power available = 119.28 Watts ( 2.84 Amps @ 42V)
> Power-Capacity PS-Fan Output Oper
> PS Type Watts A @42V Status Status State
> ---- ------------------ ------- ------ ------ ------ -----
> 1 PWR-1900-AC/6 1019.34 24.27 OK OK on
> 2 PWR-1900-AC/6 1019.34 24.27 OK OK on
>
>
> With a PSU from an older box:
>
> g513-e-rci76-2#sh power
> system power redundancy mode = combined
> system power total = 1869.42 Watts (44.51 Amps @ 42V)
> system power used = 1579.62 Watts (37.61 Amps @ 42V)
> system power available = 289.80 Watts ( 6.90 Amps @ 42V)
> Power-Capacity PS-Fan Output Oper
> PS Type Watts A @42V Status Status State
> ---- ------------------ ------- ------ ------ ------ -----
> 1 PWR-1900-AC/6 1869.42 44.51 OK OK on
> 2 PWR-1900-AC/6 1019.34 24.27 OK OK on
>
>
> NEW PSUs info:
>
> 513-e-rci76-2#sh idprom power-supply 1
> IDPROM for power-supply #1
> (FRU is 'AC_6 power supply, 1900 watt')
> OEM String = 'Cisco Systems, Inc.'
> Product Number = 'PWR-1900-AC/6'
> Serial Number = 'DCA1021402C'
> Manufacturing Assembly Number = '34-1809-03'
> Manufacturing Assembly Revision = 'A0'
> Hardware Revision = 1.1
> Current supplied (+) or consumed (-) = 24.27A
>
>
> g513-e-rci76-2#sh idprom power-supply 2
> IDPROM for power-supply #2
> (FRU is 'AC_6 power supply, 1900 watt')
> OEM String = 'Cisco Systems, Inc.'
> Product Number = 'PWR-1900-AC/6'
> Serial Number = 'DCA1021401P'
> Manufacturing Assembly Number = '34-1809-03'
> Manufacturing Assembly Revision = 'A0'
> Hardware Revision = 1.1
> Current supplied (+) or consumed (-) = 24.27A
>
>
>
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
More information about the cisco-nsp
mailing list