[c-nsp] 7606 power supply issue

[Richard A Steenbergen]

On Thu, Dec 21, 2006 at 07:31:09PM -0500, Richard A Steenbergen wrote:
> As for the why, a 1900W PS will do all 1900W on a 110V feed, while the 
> 2700W requires 220V or else it functions like a 1350W PS:

Actually nevermind I take that back, I was confused about my power feeds. 
:P 1900W power supplies only do 1050W when running 100-120V, which is 
probably what the original poster was seeing too.

http://www.cisco.com/en/US/products/hw/routers/ps368/products_installation_guide_chapter09186a008007c8a8.html#wp1021567

-- 
Richard A Steenbergen <ras at e-gerbil.net>       http://www.e-gerbil.net/ras
GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)