[c-nsp] excessive buffer overrun/ignored packets on GEIP+ interface

[Kristofer Sigurdsson]

Hi,

2006/12/23, Carlos Kamtha <kamtha at ak-labs.net>:
>
> Configuration is as follows:
>
>
> 7507 w/GEIP+ --------> Cat6509 (MM fibre)
>
> Sometimes, (not always) I get tons of packet loss on the link. a show interface
> shows a gross amount of 641521 overrun, 16211710 ignored errors.

Are those input or output errors?  Under what circumstances does this
happen?  Do you have any data on packet or bit rate "normally" vs.
when this happens?

What pops into my head first is that the 6500 is sending too much
traffic for the 7500 to handle.

 -Kristo