[c-nsp] Etherchannel

[Tassos Chatzithomaoglou]

I guess you could try the following:

2950
----
int x/x
channel-group x mode on

3500XL
------
int x/x
port group x


Just make sure you have all ports shut before assigning them to groups.

--
Tassos

Eusebio Lo'pez wrote on 28/12/2006 1:49 μμ:
> I have formed Etherchannel configuration between two Catalyst 2950 and work perfectly. The problem is that I want to use a C3524XL with ios c3500xl-c3h2s-mz.120-5.WC9.bin and I do not find command channel-group. I will be able to use the command port group?
> 
> Cheers
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>