[c-nsp] CE1 (balanced) Port adapter,
controller goes DOWN frequently.
Gangasagar Amula
sagar_cisco at rediffmail.com
Wed Feb 1 02:22:39 EST 2006
Hi all,
Sorry i couldnt attched the whole tech-support due to space contraint.
Nevertheless, Please find the below details:
------------------ show version ------------------
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-IK9S-M), Version 12.3(9a), RELEASE SOFTWARE (fc4)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Thu 22-Jul-04 20:56 by kellythw
Image text-base: 0x60008AF4, data-base: 0x61E64000
ROM: System Bootstrap, Version 12.2(20030826:190624) [BLD-npeg1_rommon_r11 102], DEVELOPMENT SOFTWARE
BOOTLDR: 7200 Software (C7200-KBOOT-M), Version 12.2(15)B, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
NEWBOMBAY uptime is 1 week, 2 days, 2 hours, 20 minutes
System returned to ROM by power-on
System restarted at 11:00:26 UTC Sun Jan 22 2006
System image file is "disk2:c7200-ik9s-mz.123-9a.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
<http://www.cisco.com/wwl/export/crypto/tool/stqrg.html>
If you require further assistance please contact us by sending email to
export at cisco.com. <https://puck.nethernet/mailman/listinfo/cisco-nsp>
cisco 7206VXR (NPE-G1) processor (revision A) with 229376K/32768K bytes of memory.
Processor board ID 32409006
SB-1 CPU at 700MHz, Implementation 1, Rev 0.2, 512KB L2 Cache
6 slot VXR midplane, Version 2.8
Last reset from power-on
Channelized E1, Version 1.0.
Bridging software.
X.25 software, Version 3.0.0.
Primary Rate ISDN software, Version 1.1.
PCI bus mb1 (Slots 1, 3 and 5) has an aggregate of 600 bandwidth points.
Total of 600 bandwidth points have been used on PCI bus mb1.
PA's ( ) has/have over subscribed 0 bandwidth points in single port configuration on PCI bus mb1.
PCI bus mb2 (Slots 2, 4, 6) has an aggregate of 600 bandwidth points.
Total of 0 bandwidth points have been used on PCI bus mb2.
PA's ( ) has/have over subscribed 0 bandwidth points in single port configuration on PCI bus mb2.
Please refer to the following document "Cisco 7200 Series Port Adaptor Hardware Configuration Guidelines" on CCO <www.cisco.com>, for c7200 bandwidth points oversubscription/usage guidelines.
3 Gigabit Ethernet/IEEE 802.3 interface(s)
221 Serial network interface(s)
16 Channelized E1/PRI port(s)
1 Integrated service adapter(s)
509K bytes of non-volatile configuration memory.
62592K bytes of ATA PCMCIA card at slot 2 (Sector size 512 bytes).
16384K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102
------------------ show diag ------------------
Slot 1:
Channelized E1 (balanced) Port adapter, 8 ports
Port adapter is analyzed
Port adapter insertion time 1w2d ago
EEPROM contents at hardware discovery:
Hardware revision 1.0 Board revision G0
Serial number 31905238 Part number 73-2543-07
FRU Part Number: PA-8E1/120=, PA-MC-8E1/120=
Test history 0x0 RMA number 00-00-00
EEPROM format version 1
EEPROM contents (hex):
0x00: 01 73 01 00 01 E6 D5 D6 49 09 EF 07 00 00 00 00
0x10: 80 00 00 00 04 03 12 00 FF FF FF FF FF FF FF FF
Slot 3:
Channelized E1 (balanced) Port adapter, 8 ports
Port adapter is analyzed
Port adapter insertion time 1w2d ago
EEPROM contents at hardware discovery:
Hardware revision 1.0 Board revision G0
Serial number 31905219 Part number 73-2543-07
FRU Part Number: PA-8E1/120=, PA-MC-8E1/120=
Test history 0x0 RMA number 00-00-00
EEPROM format version 1
EEPROM contents (hex):
0x00: 01 73 01 00 01 E6 D5 C3 49 09 EF 07 00 00 00 00
0x10: 80 00 00 00 04 03 11 00 FF FF FF FF FF FF FF FF
Slot 5:
VAM2 Encryption/Compression engine, Port adapter
Port adapter is analyzed
Port adapter insertion time 1w2d ago
EEPROM contents at hardware discovery:
Hardware Revision : 2.0
PCB Serial Number : JAB0815089F
Part Number : 73-8491-02
Board Revision : A0
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Deviation Number : 0-0
Product (FRU) Number : SA-VAM2
Top Assy. Part Number : 800-22836-02
CLEI Code :
Version Identifier (VID) : V
Unknown Field (type 0020): FF
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 03 E4 41 02 00 C1 8B 4A 41 42 30 38 31
0x10: 35 30 38 39 46 82 49 21 2B 02 42 41 30 03 00 81
0x20: 00 00 00 00 04 00 80 00 00 00 00 CB 94 53 41 2D
0x30: 56 41 4D 32 20 20 20 20 20 20 20 20 20 20 20 20
0x40: 20 C0 46 03 20 00 59 34 02 C6 8A 00 00 00 00 00
0x50: 00 00 00 00 00 89 89 56 00 01 20 FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
------------------ show c7200 ------------------
Network IO Interrupt Throttling:
throttle count=0, timer count=0
active=0, configured=0
netint usec=4000, netint mask usec=200
Midplane EEPROM:
Hardware revision 2.8 Board revision B0
Serial number 32409006 Part number 73-3223-11
Test history 0x0 RMA number 00-00-00
MAC Pool Size 1024 MAC Addr Base 0011.bbfd.d300
Chassis Model 0x6
EEPROM format version 1
EEPROM contents (hex):
0x00: 01 06 02 08 01 EE 85 AE 49 0C 97 0B 00 11 BB FD
0x10: D3 00 04 00 00 00 00 00 04 05 27 58 00 00 FF 00
0x20: 00 00 00 00 63 5C FC C4 63 3E 00 00 60 86 3E C0
0x30: 00 00 00 00 00 00 00 00 00 00 00 00 63 5C FC C4
C7206VXR CPU EEPROM:
Hardware Revision : 1.3
Top Assy. Part Number : 800-18896-08
Part Number : 73-6988-08
Board Revision : A0
PCB Serial Number : 31686429
RMA History : 00
Fab Version : 05
Fab Part Number : 28-5082-05
Product (FRU) Number : NPE-G1
Deviation Number : 0-0
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 03 5B 41 01 03 C0 46 03 20 00 49 D0 08
0x10: 82 49 1B 4C 08 42 41 30 C1 8B 33 31 36 38 36 34
0x20: 32 39 00 00 00 04 00 02 05 85 1C 13 DA 05 CB 86
0x30: 4E 50 45 2D 47 31 80 00 00 00 00 FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
TLB entries (39/64 used):
Virt Address range Phy Address range Attributes
0x4B000000:0x4B1FFFFF 0x14B000000:0x14B1FFFFF CacheMode=2, RW, Invalid
0x4B200000:0x4B3FFFFF 0x14B200000:0x14B3FFFFF CacheMode=2, RW, Invalid
0x10000000:0x10001FFF 0x0FC010000:0x0FC011FFF CacheMode=2, RW, Valid
0x42000000:0x43FFFFFF 0x062000000:0x063FFFFFF CacheMode=2, RW, Valid
0x46000000:0x47FFFFFF 0x066000000:0x067FFFFFF CacheMode=2, RW, Valid
0x3C000000:0x3C7FFFFF 0x068000000:0x0687FFFFF CacheMode=2, RW, Invalid
0x3C800000:0x3CFFFFFF 0x068800000:0x068FFFFFF CacheMode=2, RW, Valid
0x3D000000:0x3D7FFFFF 0x06D000000:0x06D7FFFFF CacheMode=2, RW, Invalid
0x3D800000:0x3DFFFFFF 0x069000000:0x0697FFFFF CacheMode=2, RW, Valid
0x3E000000:0x3E7FFFFF 0x06D800000:0x06DFFFFFF CacheMode=2, RW, Invalid
0x3E800000:0x3EFFFFFF 0x069800000:0x069FFFFFF CacheMode=2, RW, Valid
0x3F000000:0x3F7FFFFF 0x06E000000:0x06E7FFFFF CacheMode=2, RW, Invalid
0x1FC00000:0x1FC7FFFF 0x01FC00000:0x01FC7FFFF CacheMode=2, RO, Valid
0x1E000000:0x1E7FFFFF 0x01E000000:0x01E7FFFFF CacheMode=2, RW, Valid
0x1E800000:0x1E9FFFFF 0x01E800000:0x01E9FFFFF CacheMode=2, RW, Valid
0x60000000:0x607FFFFF 0x000000000:0x0007FFFFF CacheMode=5, RO, Valid
0x60800000:0x60FFFFFF 0x000800000:0x000FFFFFF CacheMode=5, RO, Valid
0x61000000:0x617FFFFF 0x001000000:0x0017FFFFF CacheMode=5, RO, Valid
0x61800000:0x619FFFFF 0x001800000:0x0019FFFFF CacheMode=5, RO, Valid
0x61A00000:0x61BFFFFF 0x001A00000:0x001BFFFFF CacheMode=5, RO, Valid
0x61C00000:0x61DFFFFF 0x001C00000:0x001DFFFFF CacheMode=5, RO, Valid
0x61E00000:0x61E1FFFF 0x001E00000:0x001E1FFFF CacheMode=5, RO, Valid
0x61E20000:0x61E3FFFF 0x001E20000:0x001E3FFFF CacheMode=5, RO, Valid
0x61E40000:0x61E5FFFF 0x001E40000:0x001E5FFFF CacheMode=5, RO, Valid
0x61E60000:0x61E61FFF 0x001E60000:0x001E61FFF CacheMode=5, RO, Valid
0x61E62000:0x61E63FFF 0x001E62000:0x001E63FFF CacheMode=5, RO, Valid
0x61E64000:0x61E65FFF 0x001E64000:0x001E65FFF CacheMode=5, RW, Valid
0x61E66000:0x61E67FFF 0x001E66000:0x001E67FFF CacheMode=5, RW, Valid
0x61E68000:0x61E6FFFF 0x001E68000:0x001E6FFFF CacheMode=5, RW, Valid
0x61E70000:0x61E77FFF 0x001E70000:0x001E77FFF CacheMode=5, RW, Valid
0x61E78000:0x61E7FFFF 0x001E78000:0x001E7FFFF CacheMode=5, RW, Valid
0x61E80000:0x61EFFFFF 0x001E80000:0x001EFFFFF CacheMode=5, RW, Valid
0x61F00000:0x61F7FFFF 0x001F00000:0x001F7FFFF CacheMode=5, RW, Valid
0x61F80000:0x61FFFFFF 0x001F80000:0x001FFFFFF CacheMode=5, RW, Valid
0x62000000:0x63FFFFFF 0x002000000:0x003FFFFFF CacheMode=5, RW, Valid
0x64000000:0x65FFFFFF 0x004000000:0x005FFFFFF CacheMode=5, RW, Valid
0x66000000:0x67FFFFFF 0x006000000:0x007FFFFFF CacheMode=5, RW, Valid
0x68000000:0x6FFFFFFF 0x008000000:0x00FFFFFFF CacheMode=5, RW, Valid
0x0E000000:0x0FFFFFFF 0x00E000000:0x00FFFFFFF CacheMode=5, RW, Valid
It is normal operation to have both Valid and Invalid TLB entries.
System was restarted by power-on at 09:43:06 UTC Tue Oct 12 2004
0 spurious cache errors detected.
System Controller Network Interrupts
Wrapper is INSTALLED at address 0x6086B950
Interrupt Register is at 0xB0020040 (0x0000000000000000)
Registered Interrupts:
Level Mask Count Data Interrupt Handler
0 0x0000000000200000 0 0x638A06AC 0x60157E54 (GigabitEthernet0/3)
0 0x0000000000100000 0 0x6384E044 0x60157E54 (GigabitEthernet0/2)
0 0x0000000000080000 161219928 0x6357F6C0 0x60157E54 (GigabitEthernet0/1)
1 0x0000000800000000 2 0x00000000 0x60158508 (SBETH media interrupt)
1 0x0000000000001000 1533 0x00000000 0x6086BDE8 (BCM-1250 PCMCIA)
2 0x0000000000000020 0 0x6356EEDC 0x6086C238 (SB1250 Timer 3)
2 0x0000000000000010 0 0x6356EE2C 0x6086C238 (SB1250 Timer 2)
2 0x0000000000000008 0 0x6356ED7C 0x6086C238 (SB1250 Timer 1)
2 0x0000000000000004 0 0x6356ECCC 0x6086C238 (SB1250 Timer 0)
4 0x007C00000000E0C3 0 0x00000000 0x60889E5C (Spurious Intr ERROR Handler)
4 0x0000000000020000 0 0x00000000 0x60889A54 (Corrected ECC Error Handler)
4 0x0000000000010000 0 0x00000000 0x60889718 (Bad ECC Error Handler)
4 0x0000003000000000 0 0x00000000 0x6086BE04 (Sturgeon Error Handler)
4 0x0003000000000000 0 0x62CCD6A0 0x60889A88 (BCM1250 Host LDT Bridge Error Handler)
4 0x0000000000040000 0 0x00000000 0x60889CD0 (BCM1250 IO-Bus Error Handler)
4 0x0080000000000000 0 0x00000000 0x60889B10 (BCM1250 Host PCI Bridge Error Handler)
------------------ show pci hardware ------------------
BCM1250 LDT Host Bridge, handle=0
BCM bridge, config=0x0
(0x00):dev, vendor id = 0x0002166D
(0x04):status, command = 0x00100107
(0x08):class code, revid = 0x06000002
(0x0C):hdr, lat timer, cls = 0x00010000
(0x18):bus id registers = 0x000F0300
(0x1C):secondary status = 0x0000F141
(0x20):mem base/limit = 0x4FF04880
(0x30):io upper limit/base = 0x00010001
(0x34):capabilities ptr = 0x00000040
(0x38):expansion rom bar = 0x00000000
(0x3C):bridge ctrl = 0x00220000
(0x40):LDT cmd, cap id, = 0x20000008
(0x44):Link config/control = 0x00000020
(0x48):Link frequency = 0x00000211
(0x50):SRIcmd, srirxden, sritxden = 0x52211010
(0x54):SRI tx numerator = 0x0000FFFF
(0x58):SRI rx numerator = 0x0000FFFF
(0x68):Error status/control = 0x00009A49
(0x6C):Tx ctrl, databufalloc = 0x00041515
(0xC8):Tx buffer count max = 0x00FFFFFF
(0xDC):Rx CRC expected = 0xC7BFF59E
(0xF0):Rx CRC received = 0xBB7FF7FB
BCM PCI Host Bridge:
bus_no=0, device_no=0
DeviceID=0x0001, VendorID=0x166D, Cmd=0x0146, Status=0x02A0
Cls=0x06/0x00/0x00, Rev=0x02, LatencyTimer=0x2C, CacheLineSize=0x10
BaseAddr0=0x60000008, BaseAddr1=0x00000000, MaxLat=0x00, MinGnt=0x00
SubsysDeviceID=0x0000, SubsysVendorID=0xFFFF, ErrorAddr=0x00004068
Bridge 0, for PA Bay 0 (I/O Card, PCMCIA, Interfaces), Handle=0
DEC21150 bridge chip, Primary Bus 0, Secondary Bus 16,config=0x0
(0x00):dev, vendor id = 0x00231011
(0x04):status, command = 0x02B00147
(0x08):class code, revid = 0x06040006
(0x0C):hdr, lat timer, cls = 0x00012E10
(0x18):sec lat,cls & bus no = 0x18111000
(0x1C):sec status, io base = 0x22A03101
Received Master Abort on secondary bus
(0x20):mem base & limit = 0x48704000
(0x24):prefetch membase/lim = 0x0001FF01
(0x30):io base/lim upper16 = 0x00010001
(0x3C):bridge ctrl = 0x00030000
(0x40):arb/serr, chip ctrl = 0x02000000
(0x64):serr disable, gpio = 0xF0000000
(0x68):sec clk ctrl,serrsta = 0x000001FF
Sturgeon LDT Bridge 0, for PA bay 1, 3 and 5, handle=1
AP1011 bridge, config=0x0
(0x00):dev, vendor id = 0x001014D9
(0x04):status, command = 0x00100107
(0x08):class code, revid = 0x06040000
(0x0C):hdr, lat timer, cls = 0x00010010
(0x18):bus id registers = 0x18090403
(0x1C):secondary status = 0x00A09141
(0x20):mem base/limit = 0x4AF04880
(0x30):io upper limit/base = 0x00010001
(0x34):capabilities ptr = 0x00000040
(0x38):expansion rom bar = 0x00000000
(0x3C):bridge ctrl = 0x00230000
(0x40):LDT cmd, cap id, = 0x00210008
(0x44):Link config/control 0 = 0x00000020
(0x48):Link config/control 1 = 0x00000020
(0x4C):LDT revision id = 0x00000011
(0x60):PCI control, read = 0x2F000327
(0x64):Error control = 0x1214FE80
(0x68):LDT error control = 0x00000A49
(0x6C):Tx ctrl, databufalloc = 0x00041515
(0x70):Link impedance ctrl 0 = 0x8D3A0000
(0x74):Link impedance ctrl 1 = 0xA4FE0000
(0xC8):Tx buffer count max 0 = 0x00FFFFFF
(0xCC):Tx buffer count max 1 = 0x00FFFFFF
(0xD4):Debug = 0x03CB089F
(0xD8):AP1011 Diagnostics = 0x00000010
(0xDC):Link 0 rx CRC expected = 0x86E40A0C
(0xF0):Link 0 rx CRC received = 0xD003C850
(0xF4):Link 1 rx CRC expected = 0x087AC40E
(0xF8):Link 1 rx CRC received = 0x4CC37960
Sturgeon LDT Bridge 1, for PA bay 2, 4 and 6, handle=2
AP1011 bridge, config=0x0
(0x00):dev, vendor id = 0x001014D9
(0x04):status, command = 0x00100107
(0x08):class code, revid = 0x06040000
(0x0C):hdr, lat timer, cls = 0x00010010
(0x18):bus id registers = 0x180F0A03
(0x1C):secondary status = 0x00A0F1A1
(0x20):mem base/limit = 0x4FF04D00
(0x30):io upper limit/base = 0x00010001
(0x34):capabilities ptr = 0x00000040
(0x38):expansion rom bar = 0x00000000
(0x3C):bridge ctrl = 0x00230000
(0x40):LDT cmd, cap id, = 0x00220008
(0x44):Link config/control 0 = 0x00000020
(0x48):Link config/control 1 = 0x000000C0
(0x4C):LDT revision id = 0x00000011
(0x60):PCI control, read = 0x2F000327
(0x64):Error control = 0x1214FE80
(0x68):LDT error control = 0x00000A49
(0x6C):Tx ctrl, databufalloc = 0x00041515
(0x70):Link impedance ctrl 0 = 0x84FA0000
(0x74):Link impedance ctrl 1 = 0x07C00000
(0xC8):Tx buffer count max 0 = 0x00FFFFFF
(0xCC):Tx buffer count max 1 = 0x00FFFFFF
(0xD4):Debug = 0x03CB089F
(0xD8):AP1011 Diagnostics = 0x00000010
(0xDC):Link 0 rx CRC expected = 0x2DCC3815
(0xF0):Link 0 rx CRC received = 0x24862B2A
(0xF4):Link 1 rx CRC expected = 0x8C4A9E05
(0xF8):Link 1 rx CRC received = 0x80096262
------------------ show pci controller ------------------
------------------ show sysctlr ------------------
BCM1250 LDT Host Bridge, handle=0
BCM bridge, config=0x0
(0x00):dev, vendor id = 0x0002166D
(0x04):status, command = 0x00100107
(0x08):class code, revid = 0x06000002
(0x0C):hdr, lat timer, cls = 0x00010000
(0x18):bus id registers = 0x000F0300
(0x1C):secondary status = 0x0000F141
(0x20):mem base/limit = 0x4FF04880
(0x30):io upper limit/base = 0x00010001
(0x34):capabilities ptr = 0x00000040
(0x38):expansion rom bar = 0x00000000
(0x3C):bridge ctrl = 0x00220000
(0x40):LDT cmd, cap id, = 0x20000008
(0x44):Link config/control = 0x00000020
(0x48):Link frequency = 0x00000211
(0x50):SRIcmd, srirxden, sritxden = 0x52211010
(0x54):SRI tx numerator = 0x0000FFFF
(0x58):SRI rx numerator = 0x0000FFFF
(0x68):Error status/control = 0x00009A49
(0x6C):Tx ctrl, databufalloc = 0x00041515
(0xC8):Tx buffer count max = 0x00FFFFFF
(0xDC):Rx CRC expected = 0xC7BFF59E
(0xF0):Rx CRC received = 0xBB7FF7FB
BCM PCI Host Bridge:
bus_no=0, device_no=0
DeviceID=0x0001, VendorID=0x166D, Cmd=0x0146, Status=0x02A0
Cls=0x06/0x00/0x00, Rev=0x02, LatencyTimer=0x2C, CacheLineSize=0x10
BaseAddr0=0x60000008, BaseAddr1=0x00000000, MaxLat=0x00, MinGnt=0x00
SubsysDeviceID=0x0000, SubsysVendorID=0xFFFF, ErrorAddr=0x00004068
Bus Watcher Counters
cor_l2cache_data_ecc_count = 0
bad_l2cache_data_ecc_count = 0
cor_l2cache_tag_ecc_count = 0
bad_l2cache_tag_ecc_count = 0
cor_memory_data_ecc_count = 0
bad_memory_data_ecc_count = 0
bus_errors = 0
BCM Status Registers
A_SCD_BUS_ERR_STATUS = 0000000080000000
A_BUS_ERR_DATA_0 = EEED08DDAFE6DD5D
A_BUS_ERR_DATA_1 = 8643FEFE3E5B5BC5
A_BUS_ERR_DATA_2 = 40D0A916BF7F60F6
A_BUS_ERR_DATA_3 = 976B985CA9E7EDF0
A_SCD_SYSTEM_REVISION = 6F4A8025125011FF
A_IO_INTERRUPT_STATUS = 0000000000000000
A_IO_INTERRUPT_ADDR0 = 0000000000000000
A_IO_INTERRUPT_ADDR1 = 0000000000000000
Data Mover Channel 1 (Packet moving DMA engine 1):
channel=0x6356EF8C, ring=0xE000080, context=0x6356EFF4, entries=256
dma_used=0, dma_head=0, dma_tail=0 exhausted_dma_entries=0
Data Mover Channel 2 (Packet moving DMA engine 2):
channel=0x6356FC20, ring=0xE0010C0, context=0x63570D14, entries=256
dma_used=0, dma_head=0, dma_tail=0 exhausted_dma_entries=0
Router#
On Tue, 31 Jan 2006 Gangasagar Amula wrote :
>
>Hi All,
>
>I am attaching the show tech of the router. Please analyse and revert.
>
>Also we tried putting the card into other slot of 7206 router and after which the card never went down...
>
>P.S.: Sorry for my previous mail..
>
>Regards,
>Sagar.
>
The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments.
WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.
www.wipro.com
More information about the cisco-nsp
mailing list