[c-nsp] Help with static NAT mapping

james edwards hackerwacker at cybermesa.com
Thu Feb 2 13:07:42 EST 2006

I want to statically map to, who would I do this
with this existing config ?

interface FastEthernet0
  ip address secondary
 ip address
 ip nat inside
 no ip mroute-cache
 speed auto
 service-policy input input-voip-traffic
 no cdp enable
interface Serial0
 mtu 4470
 bandwidth 960
 ip address
 ip nat outside
 ip inspect FW out
 encapsulation frame-relay IETF
 no ip mroute-cache
 service-module t1 timeslots 1-15
 frame-relay map ip 17 broadcast IETF
 frame-relay interface-dlci 17
 frame-relay lmi-type ansi
 crypto map StaticMap
ip nat inside source list 107 interface Serial0 overload

More information about the cisco-nsp mailing list