[c-nsp] NPE-G1 rom-monitor upgrade

[Kim Onnel]

A sumb question, why would you need to upgrade it ?

On 2/8/06, Dmitry Kiselev <dmitry at dmitry.net> wrote:
>
> Hi!
>
>
>   While I try to upgrade rommon in my NPE-G1 I got an error.
> Is it mean that my version of NPE-G1 have rommon in non-erasable ROM?
> No way to upgrade it?
>
> P.S. Question come from MPF world :)
>
>
> Router#upgrade rom-monitor file
> tftp://82.144.192.34/C7200_NPEG1_RMFUR.srec.123-4r.T3
> Loading C7200_NPEG1_RMFUR.srec.123-4r.T3 from 82.144.192.34 (via
> GigabitEthernet0/1):
> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
> [OK - 479169 bytes]
>
> ROMMON upgrade aborted; Current ROMMON does not support upgrade capability
>
> Router#sh rom-monitor
> ReadOnly ROMMON version:
>
> No upgrade ROMMON programmed or not yet run
> Error: Cannot identify ROMMON region -1 being run
> Error: Unknown region -1 selected for nextboot
>
> Router#sh ver
> Cisco IOS Software, 7200 Software (C7200-ADVIPSERVICESK9-M), Version 12.4(4)T1,
> RELEASE SOFTWARE (fc4)
> ...
> ROM: System Bootstrap, Version 12.2(20030826:190624) [BLD-npeg1_rommon_r11
> 102], DEVELOPMENT SOFTWARE
> ...
> Cisco 7204VXR (NPE-G1) processor (revision A) with 229376K/32768K bytes of
> memory.
> Processor board ID 31648833
> SB-1 CPU at 700MHz, Implementation 1025, Rev 0.2, 512KB L2 Cache
> 4 slot VXR midplane, Version 2.7
> ...
> 3 Gigabit Ethernet interfaces
> 509K bytes of NVRAM.
>
> 62592K bytes of ATA PCMCIA card at slot 2 (Sector size 512 bytes).
> 16384K bytes of Flash internal SIMM (Sector size 256K).
> Configuration register is 0x2102
>
>
> --
> Dmitry Kiselev
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>