[c-nsp] Traffic shaping on PIX 515E Version 6.3

[Jim McBurnett]

Upgrade to 7.0 and you will have some options..


J 

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Dave Lim
Sent: Wednesday, February 08, 2006 11:16 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Traffic shaping on PIX 515E Version 6.3

Hi,

Bear with me guys. I have never done QOS or traffic shaping on Cisco
equipment before. I wanna do QOS or Traffic shaping such that I want to
limit a certain sustain transfer rate for each ip and servers to have
priority with regards to bandwidth. Note that the PIX is doing NAT 0 and
another equipment, a radware is doing the NAT as I have 2 ADSL line.

This is with regards to traffic initiated from inside to outside.  Is it
possible to do traffic shaping on a PIX 515E Version 6.3?
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/