[c-nsp] Aggregated Microflow Policers

[Peter Salanki]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello,

I'm reading about per-user microflow policing in SUP720 at http:// 
www.cisco.com/en/US/products/hw/switches/ps700/ 
products_tech_note09186a00801c8c4b.shtml#supported
It states that I can't do microflow policing on egress, and I can't  
do aggregated microflow policing.

Let's suppose I have a 7600 with 3 ge ports. One is a routed port to  
a customer segment, and the other two are different uplinks. Policing  
the incoming traffic from the customer segment to the internet on a  
per-user bases is no problem, but how do I get the policing of the  
incoming->users correct? Attaching a per-user microflow policer on  
inbound on both upstreams would make the user able to get twice of  
his contracted capacity if he picks his sources right.

Thank you for your suggestions,

/Peter Salanki
Bahnhof AB (AS8473)
Stockholm, Sweden
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (Darwin)

iD8DBQFD9HUxiQKhdiFGiogRAiBRAJ9aLRwiQXHGrUXThbrmJCjTeFuDHgCfXAcQ
yxfHGcrmI0jctUzzA7qqSeE=
=SYCc
-----END PGP SIGNATURE-----