[c-nsp] Cisco Guard and loopback

[McCallum, Robert]

What do you get with the debug ip bgp command? 

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of 
> Michael McCormack
> Sent: 24 February 2006 13:32
> To: Min Qiu; cisco-nsp at puck.nether.net
> Subject: RE: [c-nsp] Cisco Guard and loopback
> 
> Actually a typo. I just changed detail for the purpose of the 
> email, but yes the remote peer on the guard is 100 
> 
> The config work son a back to back router config but not the 
> cisco guard for some "currently" unknown reason 
> 
> Thks
> Mik
> n
> -----Original Message-----
> From: Min Qiu [mailto:mqiu at globalinternetworking.com]
> Sent: 24 February 2006 13:29
> To: Michael McCormack; cisco-nsp at puck.nether.net
> Subject: RE: [c-nsp] Cisco Guard and loopback
> 
> Is Cisco Guard neighbor remote as 200 a typo or miss config?
> 
> Min
> 
> > -----Original Message-----
> > From: cisco-nsp-bounces at puck.nether.net 
> > [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Michael 
> > McCormack
> > Sent: Friday, February 24, 2006 8:19 AM
> > To: cisco-nsp at puck.nether.net
> > Subject: [c-nsp] Cisco Guard and loopback
> > 
> > 
> > We are trying to set up  eBGP peering between a test router 
> and Cisco 
> > Guard using loopback addresss and the following simple config
> > 
> > For some reason the peering will not establish to the Guard when we 
> > try to use the loopback address . Anybody got any suggestions ???
> > 
> >  
> > 
> >  
> > 
> > Router 1
> > 
> > interface Loopback0
> > 
> >  ip address 10.10.10.1 255.255.255.255
> > 
> >  
> > 
> > interface f0/0
> > 
> >  ip address 192.168.1.1 255.255.255.224
> > 
> > no shut
> > 
> > !
> > 
> > router bgp 100
> > 
> > bgp log-neighbor-changes
> > 
> > neighbor 10.10.10.2 remote-as 200
> > 
> > neighbor 10.10.10.2  ebgp-multihop 2
> > 
> > neighbor 10.10.10.2 update-source Loopback0
> > 
> > !
> > 
> > ip classless
> > 
> > ip route 10.10.10.2 255.255.255.255 192.168.1.2
> > 
> >  
> > 
> >  
> > 
> > Cisco Guard
> > 
> > interface Loopback0
> > 
> >  ip address 10.10.10.2 255.255.255.255
> > 
> >  
> > 
> > interface f0/0
> > 
> >  ip address 192.168.1.2 255.255.255.224
> > 
> > no shut
> > 
> > !
> > 
> > router bgp 200
> > 
> > bgp log-neighbor-changes
> > 
> > neighbor 10.10.10.1 remote-as 200
>                                 ^^ should this be 100?
> > 
> > neighbor 10.10.10.1  ebgp-multihop 2
> > 
> > neighbor 10.10.10.1 update-source Loopback0
> > 
> > !
> > 
> > ip classless
> > 
> > ip route 10.10.10.1 255.255.255.255 192.168.1.1
> > 
> >  
> > 
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> > 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>