[c-nsp] 6to4 relay router setup

[Pekka Savola]

Hi,

On Wed, 4 Jan 2006, matthew zeier wrote:
>  interface Tunnel2002
>  ipv6 address 2002:C058:6301::/128
>
...
> ipv6 route 2001:5A0:101::/48 Null0
> ipv6 route 2001:1990::/32 Null0
> ipv6 route 2002::/16 Tunnel2002

Note that you don't need the last one if you use ' ipv6 address 
2002:C058:6301::/16' under the interface.

I think your configs look fine based on a quick glance.  You might 
want to check that there are no v4 access lists which prevent the 
relay router from sourcing packets from 192.88.99.0/24.

You may also want to check that access-lists are allowing protocol 41.

In any case, if v6 ping between two 2002 addresses isn't working, 
you'll need to debug v4 and v6 filtering configs.

-- 
Pekka Savola                 "You each name yourselves king, yet the
Netcore Oy                    kingdom bleeds."
Systems. Networks. Security. -- George R.R. Martin: A Clash of Kings