[c-nsp] VLAN tagging

[Gert Doering]

Hi,

On Wed, Jan 11, 2006 at 02:25:05PM -0500, Jeff Kell wrote:
> Brian Desmond wrote:
> > On an access port vlan tagging doesn't occur...
> >  
> >  
> > If you want to convert a trunk port to an access port, the command on cat is 
> >  
> > set trunk 3/1 off
> > set vlan 2 3/1
> 
> 'clear trunk 3/1' turns off trunking

No.  It will remove specific VLANs from a trunk (as in "clear trunk 3/1 70"),
but will not change the trunking mode.

> 'set vlan 2 3/1' sets the vlan for an access port, or the default vlan for a trunk port

"native" VLAN, that is, the default-untagged-VLAN.

gert

-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de