[c-nsp] Enabling PIM on loopback's in Anycast RP environment

[Tantsura, Jeff]

I know, that's why I'm asking :)

--
Jeff Tantsura  CCIE# 11416
Senior IP Network Engineer


-----Original Message-----
From: Asbjorn Hojmark - Lists [mailto:Lists at Hojmark.ORG] 
Sent: 10 January 2006 22:02
To: 'Tantsura, Jeff'
Cc: cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] Enabling PIM on loopback's in Anycast RP environment

> In all cisco multicast Anycast RP designs PIM is enabled on 
> both anycast and MSDP originator loopback's, I have always done
> it this way as well but....
> is this really necessary?

No, it runs just fine without enabling PIM on the loopbacks.

-A