[c-nsp] Strange poccess on C7300

[Palis Michael]

PXF and CEF is enable to all interfaces. I am thinking of a software-bug
maybe. But I will keep troubleshooting.

-----Original Message-----
From: Saku Ytti [mailto:saku+cisco-nsp at ytti.fi] 
Sent: Wednesday, January 18, 2006 8:26 AM
To: Palis Michael
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Strange poccess on C7300

On (2006-01-18 08:01 +0200), Palis Michael wrote:
> No I am not software switching . Here is the output from show ip pxf
> accounting
> 
> PXF Utilization current:0%   1 min:1%   5 min:1%   60 min:1%
> PXF Packet Counters:
>  Ingress from GE :       393949993      Egress to GE :       410941132
>  Ingress from LCs:       399321205      Egress to LCs:       366372352
>  Ingress from RP :       499614967      Egress to RP :       508802608

Ingresss from RP and Egress to RP are too large, you are software
switching (well forwarding the packets)

show pxf interfaces would be interesting to see. And running
configuration too.

sh processes cpu | i ^CPU

should really produce close to n%/0% when you're forwarding packets 
using toasters.

>     NAT Ager Killed        :            4562
>     Host Unreachable Drop  :           24535
>     ACL input deny Drop    :         7435757
>     TTL Exceed Drop        :          281979
>     Packet Queue Tail Drop :         1045734
> 
> 
> -----Original Message-----
> From: Saku Ytti [mailto:saku+cisco-nsp at ytti.fi] 
> Sent: Tuesday, January 17, 2006 8:51 AM
> To: Palis Michael
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] Strange poccess on C7300
> 
> On (2006-01-17 08:37 +0200), Palis Michael wrote:
> 
> 
> >  I have a  cisco 7300 (NSE100) and I have very high CPU spikes and
> sometimes
> > CPU remains to 100% until it crashes. I notice that the following
process
> is
> > eating the CPU
> > 
> > 
> > 23.11% 11.60%  9.58%   0 TMC-to-RP IPC
> 
> TMC is toaster (connected to van allen, connected to rp). Are you software
> switching? Check 'show pxf interfaces | i Punt' and 'show pxf accounting',
> look for 'ingress from RP' and 'egress to rp'.
> 
> -- 
>   ++ytti
> 

-- 
  ++ytti