[c-nsp] 3825 RAM

[Ronan Daly]

Here's the correct part, yours probably says B1 instead of A1:

http://us.st11.yimg.com/store1.yimg.com/I/memx_1881_48751203

Regards,
Ronan


-----cisco-nsp-bounces at puck.nether.net wrote: -----

>To: <cisco-nsp at puck.nether.net>
>From: "Resad Rovcanin" <resad at epn.ba>
>Sent by: cisco-nsp-bounces at puck.nether.net
>Date: 24/01/2006 17:39
>Subject: [c-nsp] 3825 RAM
>
>I have same problem as Ronan Daly had back in March 2005.
>
>Original platform memory is 256M, I try to add 512M module and power
>on the router.
>
>On POST router keeps reporting error message:
>
>DIMM 0 is not Raw Card A or C, not supported.
>
>and then halts.
>
>Anybody seen/resolved something similar?
>
>Rešad Rov&#269;anin
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/

*********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the sender immediately by e-mail.

www.vistatec.ie
**********************************************************************