[c-nsp] Basic L2 1U DC Powered Switch

[Roldan, Brad]

Have you looked at Garrett Com?

http://www.garrettcom.com/unmanaged_switches.htm

Brad
-- 
Covad Communications 
2510 Zanker Road 
San Jose, CA 95131 



-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Will Hargrave
Sent: Wednesday, January 25, 2006 11:49 AM
To: Robert Blayzor
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Basic L2 1U DC Powered Switch


Robert Blayzor wrote:

> I have a few places where I have equipment co-located and the only
power
> I have available is -48vdc.  I'm trying to find a simple L2 10/100
> managed or unmanaged switch (12 port minimum) that is 1U and has a
-48v
> DC power supply. (NEBS would be a plus also)
> 
> The only one I've found from Cisco is a 2950 with the advanced
software
> image.  I'm looking for something very basic and low cost.  Any leads
> would be appreciated.

Assuming you're wanting to try other vendors, the new 3Com 5500 series
can be DC 
powered, and may suit your requirements. Should be cheaper than a 2950
anyway. 
Don't think they're NEBS compliant though.

I believe it has one of those intensely annoying 'almost-IOS-alike' 
configurations. :/

Will
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/