[c-nsp] RE: [cisco-bba] l2tp failover and loadbalancing

[Raj Panchal]

Dear Oliver,
Thanks for the response.

In your example, you mentioned
Tunnel-Preference = :1:"10",

What I understand is that this attribute will allow preference of tunnel and
its attributes when multiple reply items are being sent as grouped items to
user as part of his access-requests

As per RFC the order of preference is higher for lower value of 
Tunnel- Preference, but I can see in your example value is constant "10"
across all the 3 groups tagged with 1,2,3

So precisely will your configuration help me load balancing or failover for
Tunnel-Server-Endpoint

Thanks and Regards
Raj 



-----Original Message-----
From: Oliver Boehmer (oboehmer) [mailto:oboehmer at cisco.com] 
Sent: Friday, January 27, 2006 11:59 AM
To: Raj Panchal; cisco-bba at puck.nether.net
Cc: cisco-nsp at puck.nether.net
Subject: RE: [cisco-bba] l2tp failover and loadbalancing

Raj Panchal <> wrote on Friday, January 27, 2006 6:17 AM:


> Hello,
> Has any one tried failover and loadbalancing between 3com hiper LAC
> and Cisco LNS using Merit Radius.
> If yes then can you help me with radius config for the same ?

The Cisco LNS just accepts the sessions thrown at it, so no config
there, the load-balancing obviously happens at the LAC:
If 3com implemented RFC2868, just send multiple tunnel endpoints with
the same preference, i.e.

domain.com Password="....", Service-Type=Outbound-User
       Service-Type = Outbound-User,
       Tunnel-Type = :1:L2TP,
       Tunnel-Medium-Type = :1:IP,
       Tunnel-Server-Endpoint = :1:"10.1.1.1",
       Tunnel-Preference = :1:"10",
       Tunnel-Type = :2:L2TP,
       Tunnel-Medium-Type = :2:IP,
       Tunnel-Server-Endpoint = :2:"10.1.1.2",
       Tunnel-Preference = :2:"10",
       Tunnel-Type = :3:L2TP,
       Tunnel-Medium-Type = :3:IP,
       Tunnel-Server-Endpoint = :3:"10.1.1.3",
       Tunnel-Preference = :3:"10"

I think sending several endpoints with the same tag works as well, i.e.

       Tunnel-Type = :1:L2TP,
       Tunnel-Medium-Type = :1:IP,
       Tunnel-Preference = :1:"10",
       Tunnel-Server-Endpoint = :1:"10.1.1.1",
       Tunnel-Server-Endpoint = :1:"10.1.1.2",
       Tunnel-Server-Endpoint = :1:"10.1.1.3"

Hope it helps,

	oli

cc'ing c-nsp as you sent the Q to both aliases..



Disclaimer note on content of this message including enclosure(s) and attachments(s): The contents of this e-mail are the privileged and confidential material of VSNL. The information is solely intended for the individual/entity it is addressed to. If you are not the intended recipient of this message, please be aware that you are not authorized in any which way whatsoever to read, forward, print, retain, copy or disseminate this message or any part of it. We apologize if  you have received this e-mail in error and would request you to please notify the sender immediately by return e-mail and delete it from your computer.  The views expressed in this e-mail message are those of the individual sender, except where the sender expressly, and with authority, states them to be the views of VSNL. This e-mail message including attachment(s), if any, is believed to be free of any virus and VSNL is not responsible for any loss or damage arising in any way from its use