[c-nsp] PIM dense mode fallback prevention on Catalyst

Tantsura, Jeff jtantsura at upcbroadband.com
Fri Jan 27 05:36:07 EST 2006


Hi,

You could achieve same effect by using RP of last resort so your routers'd
never loose their connectivity to the RP (because it's local loopback)

--
Jeff Tantsura  CCIE# 11416
Senior IP Network Engineer


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of
christian.macnevin at uk.bnpparibas.com
Sent: 27 January 2006 11:08
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] PIM dense mode fallback prevention on Catalyst

Hi,
Looking at dense mode fallback commands for PIM-SM, and it appears the 
command "no ip pim dm-fallback" has been
introduced in 12.3T.  What's the support like for the cats? Can't find a 
decent support matrix for it, but it seems like a no-brainer
for inclusion.
Cheers
Christian.
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list