[c-nsp] Processor Memory Parity Errors (PMPE)

Amol Sapkal amolsapkal at gmail.com
Sun Jan 29 05:15:07 EST 2006


Hi,

I just had a 7204 going into boot mode due to a PMPE.

router2 uptime is 32 minutes
System returned to ROM by processor memory parity error at PC 0x60658C5C,
addres
s 0x0 at 08:50:10 IST Sun Jan 29 2006

The 'show region' command does show the above address as:

0x60008950  0x60703FBF     7321200  IText  R/O    main:text

The 'show stack' command shows the above address too.


router2(boot)>sh stack

Minimum process stacks:

 Free/Size   Name

 9180/12000  Init

 9432/12000  Virtual Exec

10848/12000  Exec



Interrupt level stacks:

Level    Called Unused/Size  Name

  1       20274   8080/9000  Network interfaces

  2        1290   8576/9000  DMA/Timer Interrupt

  3           0   9000/9000  PA Management Int Handler

  4      310467   8600/9000  Console Uart

  5           0   9000/9000  OIR/Error Interrupt

  7     1182333   8604/9000  NMI Interrupt Handler



System was restarted by processor memory parity error at PC 0x60658C5C,
address 0x0 at 08:50:10 IST Sun Jan 29 2006

7200 Software (C7200-IS-M), Version 12.2(17a), RELEASE SOFTWARE (fc1)

Compiled Thu 19-Jun-03 12:41 by pwade

Image text-base: 0x60008940, data-base: 0x61302000





Stack trace from system failure:

FP: 0x62310870, RA: 0x60658C5C

FP: 0x62310870, RA: 0x604F1798

FP: 0x62310AA8, RA: 0x6015AC64

FP: 0x62310B08, RA: 0x60169E14

FP: 0x62310B78, RA: 0x6016AA98



router2(boot)>



What is something new to me is when I run the command 'show bootflash:':



router2(boot)#sh bootflash:

-#- ED --type-- --crc--- -seek-- nlen -length- -----date/time------ name

1   .. image    3BC43CFE  4819BC   24  4462908 Jun 12 2001 17:32:02
c7200-kboot-

mz.121-3a.E5

2   .. unknown  630464A9  4B0BFC   25   192959 Mar 11 2002 06:01:40
crashinfo_20

020311-003140



Error getting file system status (Invalid file header magic number)

router2(boot)#



router2(boot)#cd bootflash:
router2(boot)#
router2(boot)#dir
Directory of bootflash:/

%Error calling getdents for bootflash:/ (Invalid file header magic number)
No space information available
router2(boot)#


What does the above mean? I think I will need to replace the flash?



--
Warm regards,

Amol Sapkal

-------------------------------------------------------------------
"A new study shows that licking the sweat off
a frog can cure depression. The down side is,
the minute you stop licking, the frog gets
depressed again." - Jay Leno
-------------------------------------------------------------------


More information about the cisco-nsp mailing list