[c-nsp] Catalyst 6500 Module Virtual Port Limit

[Brant I. Stevens]

All,

I have a client that has gotten the following message a few times...

%PM-SP-4-LIMITS: The number of vlan-port instances on module 1 exceeded the
recommended limit of 1800
%PM-SP-STDBY-4-LIMITS: The number of vlan-port instances on module 1
exceeded the recommended limit of 1800

This can be handled by removal of the extraneous VLANs from trunks that
don't need a given set of VLANs.

I was wondering if there was any more detailed information available about
the above...  I found some information about this from Networkers 2005 in
the Datacenter Solutions Techtorial, but was looking for a bit more detail
about this.

Regards,
Brant.