[c-nsp] Router for STM-1 termination

[Rodney Dunn]

May wanna check the 7301 1RU NPE-G1 based box.

http://tinyurl.com/885as

On Mon, Jan 30, 2006 at 11:14:51PM +0000, Stephen J. Wilcox wrote:
> 
> 'small' ?
> 
> you could get a PA into a 7120/7140, thats as small and cheap as it gets
> 
> Steve
> 
> 
> On Mon, 30 Jan 2006, Zahid Hassan wrote:
> 
> > Dear All,
> > 
> > 
> > Would really appreciate if anyone would be able to suggest the smallest
> > Cisco router capable of terminating 1 X full STM-1 circuit (un-channelized)
> > and the required module.
> > 
> > I am thinking of going for a 7204-VXR, just wondering if anyone knows of
> > anything
> > smaller than a 7200 series that will do the job.
> > 
> > 
> > Many thanks in advance.
> > 
> > 
> > Zahid
> > 
> > 
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> > 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/