[c-nsp] static route to null0 not visible (BGP) - resolved

[Alex Foster]

Hi Guys,

 

Thanks for your help with this - looks like OSPF had got screwed up -
reset the process on router-b and am now seeing the /23 and /24
netblocks in the route table on both routers (still using admin distance
of 254).  So I now have both netblocks advertised to both peers.  For
clarification - I have removed the /23 from the IGP process - is this an
acceptable architecture to adopt - little sketchy on how IGP/iBGP
interworks here but Im assuming if I don't include it within the IGP
statement, iBGP will take care of it ??

 

Regards

 

Alex

 

 

 



The information in this e-mail and any attachments is confidential and may be subject to legal professional privilege. It is intended solely for the attention and use of the named addressee(s). If you are not the intended recipient, or person responsible for delivering this information to the intended recipient, please notify the sender immediately. Unless you are the intended recipient or his/her representative you are prohibited from, and therefore must not, read, copy, distribute, use or retain this message or any part of it. The views expressed in this e-mail may not represent those of Gamma Telecom.

This message has been scanned for viruses by MailController